IT-Tests.com provide different training tools and resources to prepare for the Juniper JN0-531 exam. The preparation guide includes courses, practice test, test engine and part free PDF download.
On IT-Tests.com website you can free download part of the exam questions and answers about Juniper certification JN0-531 exam to quiz our reliability. IT-Tests's products can 100% put you onto a success away, then the pinnacle of IT is a step closer to you.
Juniper JN0-531 is a certification exam to test IT expertise and skills. If you find a job in the IT industry, many human resource managers in the interview will reference what Juniper related certification you have. If you have Juniper JN0-531 certification, apparently, it can improve your competitiveness.
All the IT professionals are familiar with the Juniper JN0-531 exam. And everyone dreams pass this demanding exam. Juniper JN0-531 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the IT-Tests.com's Juniper JN0-531 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the IT-Tests.com, then you will hold the hand of success, and never miss it.
IT-Tests.com Juniper JN0-531 exam questions are made in accordance with the latest syllabus and the actual Juniper JN0-531 certification exam. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of IT-Tests.com, then you can download part of the examination questions and answers in IT-Tests.com website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.
Are you one of them? Are you still worried and confused because of the the various exam materials and fancy training courses exam? IT-Tests.com is the right choice for you. Because we can provide you with a comprehensive exam, including questions and answers. All of these will help you to acquire a better knowledge, we are confident that you will through IT-Tests.com the Juniper JN0-531 certification exam. This is our guarantee to all customers.
IT-Tests.com's Juniper JN0-531 exam training materials are the necessities of each of candidates who participating in the IT certification. With this training material, you can do a full exam preparation. So that you will have the confidence to win the exam. IT-Tests.com's Juniper JN0-531 exam training materials are highly targeted. Not every training materials on the Internet have such high quality. Only IT-Tests.com could be so perfect.
Exam Code: JN0-531
Exam Name: Juniper (FWV, Specailist(JNCIS-FWV))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 145 Questions and Answers
Last Update: 2013-12-13
JN0-531 (FWV, Specailist(JNCIS-FWV)) Free Demo Download: http://www.it-tests.com/JN0-531.html
NO.1 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC
Juniper questions JN0-531 certification JN0-531 pdf JN0-531
NO.2 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC
Juniper JN0-531 JN0-531 exam dumps JN0-531 answers real questions JN0-531 certification
NO.3 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD
Juniper certification JN0-531 test answers JN0-531 JN0-531
NO.4 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper JN0-531 exam simulations JN0-531
NO.5 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D
Juniper JN0-531 dumps JN0-531 dumps JN0-531 questions
NO.6 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B
Juniper JN0-531 JN0-531 JN0-531 test JN0-531 pdf
NO.7 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD
Juniper certification JN0-531 JN0-531 pdf JN0-531
NO.8 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A
Juniper JN0-531 questions JN0-531 braindump JN0-531 original questions JN0-531 pdf
NO.9 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD
Juniper JN0-531 test answers JN0-531 JN0-531 JN0-531 certification JN0-531
NO.10 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B
Juniper questions JN0-531 pdf JN0-531 JN0-531 original questions JN0-531 JN0-531 exam dumps
NO.11 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B
Juniper pdf JN0-531 JN0-531 exam dumps
NO.12 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D
Juniper JN0-531 JN0-531
NO.13 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C
Juniper study guide JN0-531 JN0-531 exam JN0-531 JN0-531 test answers
NO.14 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D
Juniper JN0-531 JN0-531 test answers JN0-531 braindump
NO.15 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B
Juniper JN0-531 JN0-531 questions JN0-531
NO.16 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C
Juniper exam dumps JN0-531 JN0-531 JN0-531 pdf JN0-531 JN0-531
NO.17 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D
Juniper JN0-531 JN0-531 test answers JN0-531
NO.18 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC
Juniper JN0-531 JN0-531 JN0-531 JN0-531 practice test JN0-531 exam
NO.19 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C
Juniper test questions JN0-531 test JN0-531 JN0-531
NO.20 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD
Juniper study guide JN0-531 JN0-531 certification JN0-531
NO.21 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper test questions JN0-531 JN0-531 pdf
NO.22 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D
Juniper JN0-531 study guide JN0-531 JN0-531 answers real questions JN0-531
NO.23 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D
Juniper JN0-531 practice test JN0-531 study guide JN0-531 JN0-531
NO.24 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D
Juniper JN0-531 JN0-531 JN0-531 JN0-531
NO.25 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D
Juniper test JN0-531 certification JN0-531 original questions
NO.26 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C
Juniper answers real questions JN0-531 JN0-531
NO.27 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB
Juniper JN0-531 practice test JN0-531 JN0-531
NO.28 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A
Juniper JN0-531 answers real questions JN0-531
NO.29 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD
Juniper test answers JN0-531 JN0-531 JN0-531 certification JN0-531
NO.30 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C
Juniper JN0-531 practice test JN0-531 answers real questions
IT-Tests.com offer the latest HH0-240 Questions & Answers and high-quality 70-462 PDF Practice Test. Our 646-365 VCE testing engine and C_TADM51_70 study guide can help you pass the real exam. High-quality MB3-700 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/JN0-531.html
没有评论:
发表评论