显示标签为“ST0-10X”的博文。显示所有博文
显示标签为“ST0-10X”的博文。显示所有博文

2014年2月23日星期日

気楽にSymantec ST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075認定試験に受かるコツを知りたいのか

JPexamが提供したSymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075トレーニング資料を利用してから試験に合格することがとてもたやすことになって、これは今までがないことです。これは試験に合格した受験生の一人が言ったのです。JPexamが提供したSymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075トレーニング資料はあなたの雑然とした考えを整理できます。そうしたらあなたは心理的なストレスを減らせるだけでなく、気楽に試験に受かることもできます。JPexamには一部の問題と解答を無料に提供して差し上げますから、もし私の話を信じないのなら、試用版を使ってみてください。利用してみたら効果があるかどうか自分でよく知っているようになります。あなたに絶対向いていると信じていますよ。

SymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075認証試験を選んだ人々が一層多くなります。ST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075試験がユニバーサルになりましたから、あなたはJPexam のSymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075試験問題と解答¥を利用したらきっと試験に合格するができます。それに、あなたに極大な便利と快適をもたらせます。実践の検査に何度も合格したこのサイトは試験問題と解答を提供しています。皆様が知っているように、JPexamはSymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075試験問題と解答を提供している専門的なサイトです。

試験番号:ST0-025問題集
試験科目:Symantec Security Information Manager 4.5 (STS)
最近更新時間:2014-02-23
問題と解答:全100問
100%の返金保証。1年間の無料アップデート。

試験番号:250-401問題集
試験科目:Administration of Symantec Management Platform 7.0 with Notification Server
最近更新時間:2014-02-23
問題と解答:全145問
100%の返金保証。1年間の無料アップデート。

試験番号:250-400問題集
試験科目:Administration of Altiris Client Management Suite 7.0
最近更新時間:2014-02-23
問題と解答:全185問
100%の返金保証。1年間の無料アップデート。

試験番号:ST0-10X問題集
試験科目:Veritas Storage Foundation 5 for Unix (STS)
最近更新時間:2014-02-23
問題と解答:全198問
100%の返金保証。1年間の無料アップデート。

試験番号:ST0-079問題集
試験科目:Symantec Brightmail Gateway 8.0 (STS)
最近更新時間:2014-02-23
問題と解答:全114問
100%の返金保証。1年間の無料アップデート。

試験番号:ST0-075問題集
試験科目:Symantec Data Loss Prevention 9.0 (STS)
最近更新時間:2014-02-23
問題と解答:全105問
100%の返金保証。1年間の無料アップデート。

SymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075認証試験のために少ないお金でよい成果を取られるのJPexamのは最良の選択でございます。JPexamは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。

JPexamのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075には何か品質問題があることを見つければ、あるいは試験に合格しなかったのなら、弊社が無条件で全額返金することを約束します。JPexamは専門的にSymantecのST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075試験の最新問題と解答を提供するサイトで、ST0-025 250-401 250-400 ST0-10X ST0-079 ST0-075についての知識をほとんどカバーしています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/250-401_exam.html

NO.1 Which Symantec Management Platform component processes data sent by the Altiris Agent and
stores it in the Configuration Management Database?
A. Symantec Management Console
B. Software Management Framework
C. Notification Server
D. Site Services
Answer: C

Symantec過去問   250-401   250-401

NO.2 Which two tabs are used to modify security roles in the Symantec Management Console? (Select two.)
A. Permissions
B. Privileges
C. Rights
D. Security
E. Membership
Answer: B,E

Symantec   250-401   250-401認定試験

NO.3 Which permissions do new security roles have?
A. the same permissions as the Symantec Administrators role
B. the same permissions as the Symantec Guests role
C. the same permissions as the Symantec Supervisors role
D. none
Answer: D

Symantec   250-401   250-401   250-401   250-401過去問

NO.4 Which component enables users to view data from the Configuration Management Database
(CMDB)?
A. Log Viewer
B. Reports
C. Notification Server
D. Software Management Framework
Answer: B

Symantec認定証   250-401   250-401認証試験

NO.5 How does the Symantec Management Console help keep reports secure and scoped?
A. by enforcing permissions that determine which reports users can view
B. by scoping privileges that determine which reports users can view
C. by using report filters so that only specific report data is displayed
D. by promptingAltiris Agents for log in credentials before viewing reports
Answer: A

Symantec認定証   250-401   250-401練習問題

NO.6 A manager is attempting to run a report that identifies users who have Microsoft Office and Adobe
software installed, but the report fails to run What is the first thing the administrator should do?
A. check the report for errors
B. check the manager's permissions
C. remove security from the report
D. clone and modify the report
Answer: B

Symantec   250-401練習問題   250-401認証試験   250-401   250-401認定試験

NO.7 During installation of the Symantec Management Platform 7.0 (SMP), an administrator specifies an
account created for SMP to be used as the Application Identity. When the administrator tries to connect to
the console from their workstation they receive an Access Denied message.
Why is the administrator's access denied?
A. The account used to install is the only account in the Symantec Administrators Group.
B. The account used during installation has NOT been added to the Domain Administrators Group.
C. The system administrator is using an account that is not a member of the Domain Administrators
Group.
D. The console must be run from a terminal services session of the Notification Server.
Answer: A

Symantec認定証   250-401過去問   250-401

NO.8 The IT staff for a large corporation is distributed among its many physical sites. The Symantec
Management Platform administrator needs to ensure that the local IT staff for any given location only has
rights to manage computers at that location and not at any other location.
Which two items must the administrator create and assign the appropriate rights to? (Select two.)
A. filter
B. organizational group
C. site
D. organizational view
E. collection
Answer: B,D

Symantec参考書   250-401   250-401

NO.9 Refer to the Exhibit.
The administrator created a report that returns the status of computers.
Which menu item should the administrator choose to compare the status from month to month?
A. Snapshot
B. Web Part
C. Static Filter
D. XML File
Answer: A

Symantec問題集   250-401   250-401

NO.10 Refer to the Exhibit.
What is the effect of setting the scoped option when building a report query?
A. The report results will be limited to the resources that the user has permissions to view.
B. The users will be unable to bring up the Resource Manager by right-clicking on a row in the report
results
C. The available data classes will be limited to those that the user has permissions to view.
D. The users will be unable to drill-down to lower levels when viewing the report results.
Answer: A

Symantec   250-401   250-401   250-401過去問   250-401

NO.11 Which component contains the core service of the Symantec Management Platform?
A. Configuration Management Database (CMDB)
B. Altiris Agent
C. Site Service
D. Notification Server
Answer: D

Symantec   250-401認定試験   250-401

NO.12 What are two ways that permissions are set within the Security Role Manager? (Select two.)
A. security role membership
B. NT rights assignment
C. inheritance
D. explicitly granted
E. domain membership
Answer: C,D

Symantec   250-401   250-401   250-401認定試験   250-401過去問   250-401問題集

NO.13 Why would an administrator want to save a report as a web part?
A. to save the results for later reference
B. to use in a resource target
C. to use in a portal page
D. to be able to e-mail the results
Answer: C

Symantec   250-401認定証   250-401認定資格   250-401過去問   250-401問題集   250-401認定資格

NO.14 An Administrator wants to customize the default Symantec Administrators security role for use as a new
template for future console administrators Upon selection, the options are grayed out and inaccessible.
Which action should the administrator take to modify these privileges?
A. break inheritance to parent roles
B. take ownership of the role
C. clone the role and modify the copy
D. use a different credential with more permissions
Answer: C

Symantec参考書   250-401過去問   250-401   250-401   250-401   250-401認定試験

NO.15 Two administrators run the same report that displays Windows XP SP1 workstations imported from
Active Directory. The North America Symantec Administrator returns 2,500 workstations. The Marketing
Manager returns 500 workstations. When they compare the results, they find that there is an overlap of
100 workstations.
Why is there an overlap in the reports?
A. because the workstations belong to multiple organizational groups in same organizational view.
B. because the workstations belong to organizational groups in separate organizational views
C. because of workstation security privilege intersection
D. because of workstation security role filters
Answer: B

Symantec認証試験   250-401   250-401認定資格   250-401   250-401

NO.16 Which statement describes the relationship between Site Server and Notification Server?
A. Site Server assists Notification Server by providing packages and tasks to theAltiris Agent.
B. Site Server sends information, events, and data from the Inventory Rule Agent to Notification Server
C. Site Server assists Notification Server by running reports.
D. Site Server takes over all functions for Notification Server.
Answer: A

Symantec   250-401過去問   250-401   250-401   250-401

NO.17 What is the first point of contact for the Altiris Agent?
A. Notification Server
B. Symantec Management Console
C. Package Service
D. Task Service
Answer: A

Symantec   250-401   250-401

NO.18 Refer to the Exhibit.
An administrator has cloned the Daily Event report. What must the administrator change to create a
Weekly Event report?
A. edit the Query Parameters to show a week of data
B. edit thedateadd(day, -1 @cutoffdate) section
C. edit the Resolved Query to show a week of data
D. edit the views on the Views tab
Answer: B

Symantec   250-401   250-401   250-401   250-401

NO.19 How is resource scoping implemented?
A. by including appropriate filters and organizational views and groups in a target's rules
B. by replacing filters and organizational views and groups in a target with appropriate secured data
classes C. by creating multiple organizational views and groups that contain appropriate subset of
resources
D. by granting permissions to appropriate organizational views and groups to a security role
Answer: D

Symantec問題集   250-401認証試験   250-401   250-401過去問

NO.20 The IT Department has been experiencing frequent turnover requiring administrators to modify security
role membership on an individual user basis An administrator wants to take advantage of membership
assignments established when new users are created in the network environment and connect them to
security roles. Which resource can be used in the Membership tab to allow user assignments to be
managed independently of the Security Role Manager?
A. Active Directory Security groups
B. Active Directory organizational units
C. Altiris Security Users
D. Altiris Security Groups
Answer: A

Symantec   250-401認証試験   250-401過去問   250-401

2013年12月16日星期一

The Best Symantec ST0-10X exam practice questions and answers

A lot of IT people want to pass Symantec certification ST0-10X exams. Thus they can obtain a better promotion opportunity in the IT industry, which can make their wages and life level improved. But in order to pass Symantec certification ST0-10X exam many people spent a lot of time and energy to consolidate knowledge and didn't pass the exam. This is not cost-effective. If you choose IT-Tests's product, you can save a lot of time and energy to consolidate knowledge, but can easily pass Symantec certification ST0-10X exam. Because IT-Tests's specific training material about Symantec certification ST0-10X exam can help you 100% pass the exam. If you fail the exam, IT-Tests.com will give you a full refund.

IT-Tests.com's Symantec ST0-10X exam training materials are bring the greatest success rate to all the candicates who want to pass the exam. Symantec ST0-10X exam is a challenging Certification Exam. Besides the books, internet is considered to be a treasure house of knowledge. In IT-Tests.com you can find your treasure house of knowledge. This is a site of great help to you. You will encounter the complex questions in the exam, but IT-Tests.com can help you to pass the exam easily. IT-Tests.com's Symantec ST0-10X exam training material includes all the knowledge that must be mastered for the purpose of passing the Symantec ST0-10X exam.

Exam Code: ST0-10X
Exam Name: Symantec (Veritas Storage Foundation 5 for Unix (STS))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 198 Questions and Answers
Last Update: 2013-12-16

The training tools of IT-Tests.com contains exam experience and materials which are come up with by our IT team of experts. Also we provide exam practice questions and answers about the Symantec ST0-10X exam certification. Our IT-Tests's high degree of credibility in the IT industry can provide 100% protection to you. In order to let you choose to buy our products more peace of mind, you can try to free download part of the exam practice questions and answers about Symantec certification ST0-10X exam online.

Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. They would choose this difficult Symantec certification ST0-10X exam to get certification and gain recognition in IT area. Symantec ST0-10X is very difficult and passing rate is relatively low. But enrolling in the Symantec certification ST0-10X exam is a wise choice, because in today's competitive IT industry, we should constantly upgrade ourselves. However, you can choose many ways to help you pass the exam.

If you are still troubled for the Symantec ST0-10X certification exam, then select the IT-Tests.com's training materials please. IT-Tests.com's Symantec ST0-10X exam training materials is the best training materials, this is not doubt. Select it will be your best choice. It can guarantee you 100% pass the exam. Come on, you will be the next best IT experts.

IT-Tests.com Symantec ST0-10X exam training materials praised by the majority of candidates is not a recent thing. This shows IT-Tests.com Symantec ST0-10X exam training materials can indeed help the candidates to pass the exam. Compared to other questions providers, IT-Tests.com Symantec ST0-10X exam training materials have been far ahead. uestions broad consumer recognition and reputation, it has gained a public praise. If you want to participate in the Symantec ST0-10X exam, quickly into IT-Tests.com website, I believe you will get what you want. If you miss you will regret, if you want to become a professional IT expert, then quickly add it to cart.

ST0-10X (Veritas Storage Foundation 5 for Unix (STS)) Free Demo Download: http://www.it-tests.com/ST0-10X.html

NO.1 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec   ST0-10X exam dumps   ST0-10X certification   ST0-10X   ST0-10X demo

NO.2 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec   ST0-10X   ST0-10X test questions

NO.3 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec   ST0-10X   ST0-10X exam dumps   ST0-10X exam simulations

NO.4 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec test questions   ST0-10X questions   ST0-10X   ST0-10X   ST0-10X study guide

NO.5 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec pdf   ST0-10X practice test   ST0-10X   ST0-10X

NO.6 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec   ST0-10X   ST0-10X exam prep   ST0-10X demo

NO.7 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec test   ST0-10X practice test   ST0-10X exam dumps   ST0-10X answers real questions

NO.8 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec   ST0-10X exam dumps   ST0-10X certification training   ST0-10X practice test

NO.9 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec   ST0-10X   ST0-10X original questions

NO.10 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec test   ST0-10X exam dumps   ST0-10X   ST0-10X

NO.11 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec pdf   ST0-10X pdf   ST0-10X

NO.12 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec braindump   ST0-10X   ST0-10X   ST0-10X

NO.13 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec   ST0-10X demo   ST0-10X

NO.14 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec   ST0-10X exam simulations   ST0-10X

NO.15 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec   ST0-10X   ST0-10X certification

NO.16 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec certification   ST0-10X answers real questions   ST0-10X braindump   ST0-10X certification training   ST0-10X

NO.17 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec   ST0-10X pdf   ST0-10X

NO.18 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec   ST0-10X braindump   ST0-10X exam   ST0-10X   ST0-10X exam

NO.19 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec exam prep   ST0-10X test answers   ST0-10X dumps   ST0-10X   ST0-10X pdf

NO.20 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec practice test   ST0-10X   ST0-10X certification   ST0-10X

IT-Tests.com offer the latest C_TADM51_70 Questions & Answers and high-quality 000-N32 PDF Practice Test. Our C_TSCM62_65 VCE testing engine and 000-622 study guide can help you pass the real exam. High-quality 70-688 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/ST0-10X.html

2013年11月25日星期一

Latest training guide for Symantec ST0-10X

We will free provide you part of the exercises of Symantec certification ST0-10X exam on the Internet to let you try to test our product's quality. After your trail you will find IT-Tests's exercises is the most comprehensive one and is what you want to.

You can first download IT-Tests's free exercises and answers about Symantec certification ST0-10X exam as a try, then you will feel that IT-Tests.com give you a reassurance for passing the exam. If you choose IT-Tests.com to provide you with the pertinence training, you can easily pass the Symantec certification ST0-10X exam.

IT-Tests.com's Symantec ST0-10X exam training materials are the best training materials of all the Internet training resources. Our visibility is very high, which are results that obtained through many candidates who have used the IT-Tests.com's Symantec ST0-10X exam training materials. If you also use IT-Tests.com's Symantec ST0-10X exam training materials, we can give you 100% guarantee of success. If you do not pass the exam, we will refund the full purchase cost to you . For the vital interests of the majority of candidates, IT-Tests.com is absolutely trustworthy.

Exam Code: ST0-10X
Exam Name: Symantec (Veritas Storage Foundation 5 for Unix (STS))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 198 Questions and Answers
Last Update: 2013-11-25

IT-Tests.com Symantec ST0-10X Training Kit is designed and ready by IT-Tests.com IT experts. Its design is closely linked to today's rapidly changing IT market. . IT-Tests.com training to help you take advantage of the continuous development of technology to improve the ability to solve problems, and improve your job satisfaction. The coverage IT-Tests.com Symantec ST0-10X questions can reach 100% , as long as you use our questions and answers, we guarantee you pass the exam the first time!

Success is has method. You can be successful as long as you make the right choices. IT-Tests.com's Symantec ST0-10X exam training materials are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail. But the remedy is not too late, go to buy IT-Tests.com's Symantec ST0-10X exam training materials quickly. With it, you will get a different life. Remember, the fate is in your own hands.

ST0-10X (Veritas Storage Foundation 5 for Unix (STS)) Free Demo Download: http://www.it-tests.com/ST0-10X.html

NO.1 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec   ST0-10X certification   ST0-10X pdf

NO.2 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec test   ST0-10X questions   ST0-10X   ST0-10X test answers

NO.3 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec   ST0-10X certification training   ST0-10X practice test   ST0-10X certification training   ST0-10X exam simulations

NO.4 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec   ST0-10X   ST0-10X questions   ST0-10X   ST0-10X certification training   ST0-10X original questions

NO.5 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec   ST0-10X   ST0-10X exam prep   ST0-10X

NO.6 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec   ST0-10X   ST0-10X exam

NO.7 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec test   ST0-10X exam prep   ST0-10X   ST0-10X   ST0-10X test

NO.8 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec test   ST0-10X   ST0-10X   ST0-10X certification

NO.9 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec   ST0-10X test answers   ST0-10X   ST0-10X

NO.10 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec   ST0-10X test answers   ST0-10X   ST0-10X study guide

NO.11 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec exam dumps   ST0-10X   ST0-10X original questions   ST0-10X   ST0-10X practice test   ST0-10X demo

NO.12 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec test   ST0-10X   ST0-10X certification   ST0-10X questions   ST0-10X questions

NO.13 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec   ST0-10X   ST0-10X

NO.14 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec   ST0-10X   ST0-10X   ST0-10X braindump

NO.15 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec questions   ST0-10X   ST0-10X   ST0-10X   ST0-10X certification training

NO.16 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec certification training   ST0-10X   ST0-10X practice test   ST0-10X study guide

NO.17 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec   ST0-10X questions   ST0-10X dumps   ST0-10X test answers

NO.18 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec questions   ST0-10X   ST0-10X   ST0-10X   ST0-10X answers real questions

NO.19 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec   ST0-10X   ST0-10X

NO.20 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec   ST0-10X   ST0-10X original questions

IT-Tests.com offer the latest 000-225 Questions & Answers and high-quality 000-226 PDF Practice Test. Our E20-555 VCE testing engine and HP2-N35 study guide can help you pass the real exam. High-quality 000-455 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/ST0-10X.html

2013年6月6日星期四

Symantec certification ST0-10X exam training methods

In order to meet the request of current real test, the technology team of research on IT-Tests.com Symantec ST0-10X exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect IT-Tests.com Symantec ST0-10X exam materials. This allows IT-Tests.com to always have the materials of highest quality.


IT-Tests.com is a website to achieve dreams of many IT people. IT-Tests.com provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing Symantec certification ST0-10X exam? Have you thought about purchasing an Symantec certification ST0-10X exam counseling sessions to assist you? IT-Tests.com can provide you with this convenience. IT-Tests's training materials can help you pass the certification exam. IT-Tests's exercises are almost similar to real exams. With IT-Tests's accurate Symantec certification ST0-10X exam practice questions and answers, you can pass Symantec certification ST0-10X exam with a high score.


You choosing IT-Tests.com to help you pass Symantec certification ST0-10X exam is a wise choice. You can first online free download IT-Tests's trial version of exercises and answers about Symantec certification ST0-10X exam as a try, then you will be more confident to choose IT-Tests's product to prepare for Symantec certification ST0-10X exam. If you fail the exam, we will give you a full refund.


Now there are many IT training institutions which can provide you with Symantec certification ST0-10X exam related training material, but usually through these website examinees do not gain detailed material. Because the materials they provide are specialized for Symantec certification ST0-10X exam, so they didn't attract the examinee's attention.


Related study materials proved that to pass the Symantec ST0-10X exam certification is very difficult. But do not be afraid, IT-Tests.com have many IT experts who have plentiful experience. After years of hard work they have created the most advanced Symantec ST0-10X exam training materials. IT-Tests.com have the best resource provided for you to pass the exam. Does not require much effort, you can get a high score. Choose the IT-Tests.com's Symantec ST0-10X exam training materials for your exam is very helpful.


Exam Code: ST0-10X

Exam Name: Symantec (Veritas Storage Foundation 5 for Unix (STS))

ST0-10X (Veritas Storage Foundation 5 for Unix (STS)) Free Demo Download: http://www.it-tests.com/ST0-10X.html


NO.1 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec study guide   ST0-10X   ST0-10X test questions

NO.2 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec   ST0-10X   ST0-10X practice test   ST0-10X test answers   ST0-10X

NO.3 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec exam prep   ST0-10X practice test   ST0-10X

NO.4 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec pdf   ST0-10X demo   ST0-10X   ST0-10X

NO.5 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec practice test   ST0-10X   ST0-10X braindump

NO.6 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec demo   ST0-10X exam dumps   ST0-10X braindump   ST0-10X   ST0-10X

NO.7 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec test questions   ST0-10X   ST0-10X   ST0-10X test questions   ST0-10X

NO.8 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec   ST0-10X test   ST0-10X exam dumps   ST0-10X test answers   ST0-10X dumps   ST0-10X

NO.9 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec exam simulations   ST0-10X   ST0-10X   ST0-10X

NO.10 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec exam prep   ST0-10X test   ST0-10X test answers   ST0-10X certification training

NO.11 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec   ST0-10X   ST0-10X test   ST0-10X

NO.12 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec   ST0-10X questions   ST0-10X study guide   ST0-10X

NO.13 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec exam prep   ST0-10X   ST0-10X test answers   ST0-10X   ST0-10X test questions   ST0-10X test questions

NO.14 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec pdf   ST0-10X   ST0-10X   ST0-10X practice test

NO.15 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec test questions   ST0-10X practice test   ST0-10X test questions   ST0-10X practice test

NO.16 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec braindump   ST0-10X original questions   ST0-10X study guide   ST0-10X practice test   ST0-10X certification training   ST0-10X

NO.17 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec   ST0-10X   ST0-10X   ST0-10X certification   ST0-10X exam

NO.18 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec   ST0-10X   ST0-10X   ST0-10X exam dumps   ST0-10X

NO.19 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec practice test   ST0-10X   ST0-10X   ST0-10X pdf

NO.20 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec   ST0-10X original questions   ST0-10X   ST0-10X questions

Having a Symantec ST0-10X certification can enhance your employment prospects,and then you can have a lot of good jobs. IT-Tests.com is a website very suitable to candidates who participate in the Symantec certification ST0-10X exam. IT-Tests.com can not only provide all the information related to the Symantec certification ST0-10X exam for the candidates, but also provide a good learning opportunity for them. IT-Tests.com be able to help you pass Symantec certification ST0-10X exam successfully.


2013年5月6日星期一

Symantec ST0-10X exam practice questions and answers

Now in such society with a galaxy of talents, stabilizing your job position is the best survival method. But stabilizing job position is not so easy. When others are fighting to improve their vocational ability, if you still making no progress and take things as they are, then you will be eliminated. In order to stabilize your job position, you need to constantly improve your professional ability and keep up with the pace of others to let you not fall far behind others.

IT-Tests.com is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose IT-Tests.com to help you. IT-Tests.com can make you feel at ease, because we have a lot of IT certification exam related training materials with high quality, coverage of the outline and pertinence, too, which will bring you a lot of help. You won't regret to choose IT-Tests, it can help you build your dream career.

As a member of the people working in the IT industry, do you have a headache for passing some IT certification exams? Generally, IT certification exams are used to test the examinee's related IT professional knowledge and experience and it is not easy pass these exams. For the examinees who are the first time to participate IT certification exam, choosing a good pertinent training program is very necessary. IT-Tests.com can offer a specific training program for many examinees participating in IT certification exams. Our training program includes simulation test before the formal examination, specific training course and the current exam which has 95% similarity with the real exam. Please add IT-Tests.com to you shopping car quickly.

ST0-10X (Veritas Storage Foundation 5 for Unix (STS)) Free Demo Download: http://pdf.it-tests.com/ST0-10X.pdf

NO.1 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec exam dumps   ST0-10X certification training   ST0-10X   ST0-10X   ST0-10X original questions

NO.2 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec original questions   ST0-10X   ST0-10X demo   ST0-10X   ST0-10X practice test

NO.3 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec answers real questions   ST0-10X dumps   ST0-10X   ST0-10X test questions   ST0-10X

NO.4 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec braindump   ST0-10X   ST0-10X   ST0-10X certification training

NO.5 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec   ST0-10X practice test   ST0-10X exam   ST0-10X   ST0-10X

NO.6 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec pdf   ST0-10X   ST0-10X test answers

NO.7 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec   ST0-10X exam prep   ST0-10X   ST0-10X

NO.8 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec exam prep   ST0-10X   ST0-10X   ST0-10X   ST0-10X   ST0-10X exam simulations

NO.9 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec   ST0-10X practice test   ST0-10X   ST0-10X

NO.10 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec   ST0-10X   ST0-10X   ST0-10X   ST0-10X   ST0-10X

NO.11 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec answers real questions   ST0-10X   ST0-10X   ST0-10X

NO.12 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec   ST0-10X   ST0-10X exam dumps   ST0-10X

NO.13 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec test   ST0-10X questions   ST0-10X   ST0-10X

NO.14 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec exam   ST0-10X test questions   ST0-10X exam dumps   ST0-10X exam prep   ST0-10X   ST0-10X test

NO.15 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec pdf   ST0-10X practice test   ST0-10X   ST0-10X   ST0-10X

NO.16 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec dumps   ST0-10X original questions   ST0-10X original questions   ST0-10X

NO.17 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec test   ST0-10X exam prep   ST0-10X   ST0-10X pdf   ST0-10X original questions

NO.18 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec pdf   ST0-10X   ST0-10X   ST0-10X dumps   ST0-10X certification

NO.19 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec dumps   ST0-10X   ST0-10X answers real questions   ST0-10X pdf

NO.20 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec   ST0-10X study guide   ST0-10X answers real questions   ST0-10X