最新RedHat RH-302 RH-202試験の練習問題と解答

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JPexam RedHatのRH-302 RH-202試験問題集はあなたが自分の目標を達成することを助けられます。JPexam RedHatのRH-302 RH-202問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。

JPexamを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。JPexamはRedHat RH-302 RH-202認証試験を助けって通じての最良の選択で、１００％のRedHat RH-302 RH-202認証試験合格率のはJPexam最高の保証でございます。君が選んだのはJPexam、成功を選択したのに等しいです。

試験番号：RH-302問題集
試験科目：Red Hat Certified Engineer on Redhat Enterprise Linux 5 (Labs)
最近更新時間：2014-02-09
問題と解答：全330問
100％の返金保証。1年間の無料アップデート。

試験番号：RH-202問題集
試験科目：Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs)
最近更新時間：2014-02-09
問題と解答：全171問
100％の返金保証。1年間の無料アップデート。

多くの時間と労力をかかってRedHatのRH-302 RH-202認定試験に合格するを冒険にすると代わりJPexamが提供した問題集を利用してわずか一度お金かかって合格するのは価値があるでしょう。今の社会の中で時間がそんなに重要で最も保障できるJPexamを選ばましょう。

RH-302 RH-202認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまRH-302 RH-202試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいRH-302 RH-202試験に関連する参考書が登場しますよ。それはJPexamのRH-302 RH-202問題集です。気楽に試験に合格したければ、はやく試しに来てください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/RH-302_exam.html

NO.1 The System you are using is for NFS (Network File Services). Some important data are shared from
your system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session, we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or
ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.

RedHat認証試験   RH-302   RH-302

NO.2 Either Reboot or use partprobe command.

RedHat認証試験   RH-302   RH-302

NO.3 mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the
value from /etc/sysctl.conf.
5. Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6. neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky from redhat. Actually is giving scenario to you to implement quota to neo user. You should
apply the quota to neo user on /home that neo user shouldn't occupied space more than 70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0
To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and
grpquota for group quota.
2. touch /home/aquota.user ->Creating blank quota database file.
3. mount -o remount /home-> Remounting the /home with updated mount options.
You can verify that /home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ->Initialization the quota on /home
5. edquota -u neo /home-> Quota Policy editor
See the snapshot
Disk quotas for user neo (uid 500):
Filesystem blocks soft hard inodes soft hard
/dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7. One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial
Size of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without
losing any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of
Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without
unmount as well as we can bring the actual size of Logical Volume on online using ext2online command.
8. Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially,physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalRH302 sized chunks known as Physical
Extents (PE). As there are several other concepts associated with the LVM system, let's start with some
basic definitions:
. Physical Volume (PV) is the standard partition that you add to the LVM mix.
Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
. Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
. Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
. Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
. Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf.-> To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13. You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window)
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address
are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to System working as a router for
two networks have IP Address 192.168.0.254 and 192.168.1.254.
To get the hosts on 192.168.1.0/24 should go through 192.168.0.254.
15. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
12. mkswap /dev/hda? ->To create Swap File system on partition.
13. swapon /dev/hda? ->To enable the Swap space from partition.
14. free -m ->Verify Either Swap is enabled or not.
15. vi /etc/fstab
/dev/hda? swap swap defaults 0 0
16. Reboot the System and verify that swap is automatically enabled or not.
16. You are a System administrator. Using Log files very easy to monitor the system.
Now there are 50 servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs
from all servers into on LOG Server. How will you configure the LOG Server to accept logs from remote
host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from other host
configure:
1. vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
17. You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You changed the
root password, again unable to login as a root.
How will you make Successfully Login as a root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:
. Boot the System on Single user mode.
. Change the password
. Check the account expire date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
1. Check the file /etc/securetty Which file blocked to root login from certain terminal.
2. If terminal is deleted or commented write new or uncomment.
3. Reboot the system and login as a root.

RedHat認証試験   RH-302   RH-302

NO.4 /dev/hda? /mnt/neo ext3 defaults 1 2

RedHat認証試験   RH-302   RH-302

NO.5 Press w to write on partitions table.

RedHat認証試験   RH-302   RH-302

NO.6 Type the Size: +100M-> You can Specify either Last cylinder of Size here.

RedHat認証試験   RH-302   RH-302

NO.7 You are giving RHCT Exam and in your Exam paper there is a written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network What, What is written here. Actually here are these parameters.
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
- Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command

RedHat認証試験   RH-302   RH-302

NO.8 Use the passwd command
2. Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is 172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
#dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer translate
domain names such as www.Redhat.com to IP addresses such as 216.148.218.197. As no individual
DNS server is large enough to keep a database for the entire Internet, they can refer requests to other
DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium Users wants to access by name so DNS
will interpret the name into ip address. You need to specify the Address if DNS server in each and every
client machine. In Redhat Enterprise Linux, you need to specify the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

RedHat認証試験   RH-302   RH-302

NO.9 Use mkfs -t ext3 /dev/hda? Where ? is your partition number

RedHat認証試験   RH-302   RH-302

NO.10 Or

RedHat認証試験   RH-302   RH-302

NO.11 Write:

RedHat認証試験   RH-302   RH-302

NO.12 Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda-> To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.

RedHat認証試験   RH-302   RH-302

NO.13 Press P to verify the partitions lists and remember the partitions name.

RedHat認証試験   RH-302   RH-302

NO.14 Change the root Password to redtophat
Answer and Explanation:
1. Boot the system in Single user mode

RedHat認証試験   RH-302   RH-302

NO.15 Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com This will set the host name only for current session. To set hostname
permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart

RedHat認証試験   RH-302   RH-302

NO.16 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

RedHat認証試験   RH-302   RH-302

NO.17 vi /etc/fstab

RedHat認証試験   RH-302   RH-302

NO.18 mkdir /mnt/neo

RedHat認証試験   RH-302   RH-302

NO.19 mke2fs -j /dev/hda? To create ext3 filesystem.

RedHat認証試験   RH-302   RH-302

NO.20 Verify by mounting on current Sessions also:

RedHat認証試験   RH-302   RH-302

Free download RedHat certification RH-202 exam questions and answers

RedHat certification RH-202 exams has become more and more popular in the fiercely competitive IT industry. Although more and more people sign up to attend this examination of, the official did not reduce its difficulty and it is still difficult to pass the exam. After all, this is an authoritative test to inspect the computer professional knowledge and information technology ability. In order to pass the RedHat certification RH-202 exam, generally, many people need to spend a lot of time and effort to review.

If you are still hesitate to choose our IT-Tests, you can try to free download part of RedHat RH-202 exam certification exam questions and answers provided in our IT-Tests. So that you can know the high reliability of our IT-Tests. Our IT-Tests.com will be your best selection and guarantee to pass RedHat RH-202 exam certification. Your choose of our IT-Tests.com is equal to choose success.

When you select to use IT-Tests's products, you have set the first foot on the peak of the IT industry and the way to your dream is one step closer. The practice questions of IT-Tests.com can not only help you pass RedHat certification RH-202 exam and consolidate your professional knowledge, but also provide you one year free update service.

Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. RedHat certification RH-202 exam is one of testing IT technology certification exams. IT-Tests.com is a website which provide you a training about RedHat certification RH-202 exam related technical knowledge.

If you are still struggling to prepare for passing RH-202 certification exam, at this moment IT-Tests.com can help you solve problem. IT-Tests.com can provide you training materials with good quality to help you pass the exam, then you will become a good RedHat RH-202 certification member. If you have decided to upgrade yourself by passing RedHat certification RH-202 exam, then choosing IT-Tests.com is not wrong. Our IT-Tests.com promise you that you can pass your first time to participate in the RedHat certification RH-202 exam and get RedHat RH-202 certification to enhance and change yourself.

Exam Code: RH-202
Exam Name: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 171 Questions and Answers
Last Update: 2013-12-19

IT-Tests's product is prepared for people who participate in the RedHat certification RH-202 exam. IT-Tests's training materials include not only RedHat certification RH-202 exam training materials which can consolidate your expertise, but also high degree of accuracy of practice questions and answers about RedHat certification RH-202 exam. IT-Tests.com can guarantee you passe the RedHat certification RH-202 exam with high score the even if you are the first time to participate in this exam.

IT-Tests.com RedHat RH-202 exam questions and answers provide you test preparation information with everything you need. About RedHat RH-202 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.

RH-202 (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs)) Free Demo Download: http://www.it-tests.com/RH-202.html

NO.1 vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.2 Reboot the System and verify that swap is automatically enabled or not.
10. You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log
from other host configure:
1. vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.3 touch /data/aquota.user

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.4 vi /etc/fstab /dev/hda? swap swap defaults 0 0

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.5 mkswap /dev/hda? To create Swap File system on partition.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.6 Press w to write on partitions table.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.7 quotaon -u /data

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.8 edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
3. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalsized chunks known as Physical Extents
(PE). As there are several other concepts associated with the LVM system, let's start with some basic
definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. ext2online -d /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
4. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.9 Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already
done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a
router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.10 quotacheck -ufm /data

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.11 free -m Verify Either Swap is enabled or not.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.12 Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer: 1. vi /etc/resolv.conf

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.13 Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.14 Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.15 Either Reboot or use partprobe command.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

NO.16 swapon /dev/hda? To enable the Swap space from partition.

RedHat   RH-202   RH-202 answers real questions   RH-202 dumps

IT-Tests.com offer the latest 000-350 Questions & Answers and high-quality 70-687 PDF Practice Test. Our 000-588 VCE testing engine and HP0-J61 study guide can help you pass the real exam. High-quality JK0-U11 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/RH-202.html

The Best RedHat RH133 exam practice questions and answers

IT-Tests.com can provide you with a reliable and comprehensive solution to pass RedHat certification RH133 exam. Our solution can 100% guarantee you to pass the exam, and also provide you with a one-year free update service. You can also try to free download the RedHat certification RH133 exam testing software and some practice questions and answers to on IT-Tests.com website.

In recent years, fierce competition agitates the forwarding IT industry in the world. And IT certification has become a necessity. If you want to get a good improvement in your career, The method that using the IT-Tests.com’s RedHat RH133 exam training materials to obtain a certificate is very feasible. Our exam materials are including all the questions which the exam required. So the materials will be able to help you to pass the exam.

IT exam become more important than ever in today's highly competitive world, these things mean a different future. RedHat RH133 exam will be a milestone in your career, and may dig into new opportunities, but how do you pass RedHat RH133 exam? Do not worry, help is at hand, with IT-Tests.com you no longer need to be afraid. IT-Tests.com RedHat RH133 exam questions and answers is the pioneer in exam preparation.

IT-Tests.com to provide you with the real exam environment to help you find the real RedHat RH133 exam preparation process. If you are a beginner or want to improve your professional skills, IT-Tests.com RedHat RH133 will help you, let you approached you desire step by step. If you have any questions on the exam question and answers, we will help you solve it. Within a year, we will offer free update.

Exam Code: RH133
Exam Name: RedHat Red Hat Linux System Administration RH133
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-29

In order to pass RedHat certification RH133 exam, selecting the appropriate training tools is very necessary. And professional study materials about RedHat certification RH133 exam is a very important part. Our Pass4Tes can have a good and quick provide of professional study materials about RedHat certification RH133 exam. Our IT-Tests.com IT experts are very experienced and their study materials are very close to the actual exam questions, almost the same. IT-Tests.com is a convenient website specifically for people who want to take the certification exams, which can effectively help the candidates to pass the exam.

RH133 (Red Hat Linux System Administration) Free Demo Download: http://www.it-tests.com/RH133.html

NO.1 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to run the cc process at
runlevel three. If the order of execution of cc command is 43, which of the following commands will John
use to accomplish his task?
A. ln -s /etc/init.d/cc /etc/rc.d/rc3.d/K43cc
B. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/K43cc
C. ln -s /etc/rc.d/cc /etc/rc.d/rc3.d/s43cc
D. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/S43cc
Answer: D

RedHat exam dumps   RH133 pdf   RH133   RH133 original questions   RH133 certification training

NO.2 You work as a System Administrator for McNeil Inc. The company has a Linux based network.
You are a root user on Red Hat operating system. You have upgraded the amount of RAM in your system
from 256 MB to 512 MB, but there is only 512 MB of swap space. Therefore, you want to add more swap
space to /dev/hdb2 hard drive to run the applications that require a large amount of memory. Which of the
following commands should you run to accomplish this task? Each correct answer represents a complete
solution. Choose all that apply.
A. mkswap /dev/hdb2
B. swapon /dev/hdb2
C. mount
D. parted
Answer: A,B,D

RedHat exam prep   RH133   RH133   RH133   RH133 exam prep

NO.3 Which of the following fsck commands will you use to check all filesystems listed in /etc/fstab?
A. fsck -P
B. fsck -f
C. fsck -A
D. fsck -y
Answer: C

RedHat   RH133 dumps   RH133

NO.4 You work as a Network Administrator for Rick Inc. The company has a Linux-based network. You are
configuring a Linux server. Which of the following bootloaders does not require to be rewritten after the
configuration of the kernel has been changed?
A. GRUB
B. BOOTP
C. LILO
D. ELILO
Answer: A

RedHat certification training   RH133 practice test   RH133   RH133 certification

NO.5 By default, which of the following commands configures the current run level?
A. chkconfig
B. pstree
C. service
D. ntsysv
Answer: D

RedHat certification   RH133 exam prep   RH133 braindump   RH133 exam   RH133 dumps   RH133

NO.6 You want to make Rick an owner of the files TRADE1.TXT and TRDREPORT.TXT. Which of the
following commands will you use to accomplish this?
A. chown rick TRADE1.TXT TRDREPORT.TXT
B. chgrp rick TRADE1.TXT + TRDREPORT.TXT
C. chown rick TRADE1.TXT + TRDREPORT.TXT
D. chgrp rick TRADE1.TXT TRDREPORT.TXT
Answer: A

RedHat pdf   RH133   RH133   RH133

NO.7 You work as a Network Administrator for Net World International. The company has a Linux-based
network. You want to upgrade an RPM package and get the status during the upgrade. Which of the
following commands will you use to accomplish the task?
A. rpm -ivh
B. rpm -evh
C. rpm -qvh
D. rpm -Uvh
Answer: D

RedHat test questions   RH133   RH133

NO.8 You work as a Software Engineer for McNiel Inc. The company has a Linux-based network. The
company has 150 Engineers. The root user has configured quota limits for each user. You want to view
quota limits for your system. Which of the following commands will you use to accomplish this task?
A. repquota -a
B. quota -v
C. quotacheck
D. edquota
Answer: B

RedHat exam simulations   RH133 practice test   RH133 exam   RH133 original questions

NO.9 You work as a Network Administrator for Tech Perfect Inc. The company has a Linux-based network.
You are configuring a server that will be used as a file server. You want to install an RPM package, named
FILELOCATOR, on the server. You want to check whether the package is already installed. Which of the
following commands will you use?
A. grep FILELOCATOR
B. find -q rpm |grep FILELOCATOR
C. rpm -qa | grep FILELOCATOR
D. find FILELOCATOR
Answer: C

RedHat   RH133   RH133 study guide

NO.10 Which of the following commands can be used to compress a file?
Each correct answer represents a complete solution. Choose all that apply.
A. gzip
B. compress
C. tar
D. zip
Answer: A,B,D

RedHat certification   RH133 study guide   RH133   RH133

NO.11 After creating the swap area, which of the following commands will you need to run to start using it?
A. mkswap
B. mkfs
C. swapon
D. swapoff
Answer: C

RedHat exam   RH133 exam dumps   RH133 pdf

NO.12 Which of following options will you use to force mtr to display numeric IP numbers and not try to
resolve the host names?
A. -t
B. -n
C. -l
D. -p
Answer: B

RedHat certification training   RH133 pdf   RH133   RH133 certification training   RH133 certification

NO.13 When installing RHEL in the graphical interface, which of the following switches can be used to specify
a resolution?
A. lowers
B. vnc
C. resolution
D. skipddc
Answer: C

RedHat   RH133   RH133

NO.14 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. He is working as a root user on the Linux operating system. He wants to add a soft limit quota
warning for the users, in which, after exceeding the quota value, a user will receive e-mail warnings about
being over quotA. Which of the following commands will John use to accomplish his task?
Each correct answer represents a complete solution. Choose all that apply.
A. repquota
B. quotaon
C. warnquota
D. edquota
E. quotaoff
Answer: C,D

RedHat   RH133   RH133   RH133 exam simulations   RH133 study guide   RH133 answers real questions

NO.15 You work as a Linux Technician for Tech Perfect Inc. The company has a Linux-based network.
You have configured a database server in the network. Users complain that the server has
become remarkably slow. However, the previous day, the server was performing well. You know that
some of the processes may be the cause of the issue. You run the PS command on the server. In the
result set, which information will you look at that suggests the problematic process?
A. A high load average
B. A high process ID
C. A low load average
D. A low CPU time
E. A high CPU time
Answer: E

RedHat   RH133 original questions   RH133 exam dumps

NO.16 Which of the following commands is used to create a user account for a new user?
A. USERMOD
B. MOUNT
C. USERADD
D. CRUSER
Answer: C

RedHat answers real questions   RH133 test   RH133   RH133

NO.17 Which of the following commands can be used to check the errors of the ext2 and ext3
filesystems?
Each correct answer represents a complete solution. Choose two.
A. fsck --ext2
B. fsck.ext3
C. fsck --ext3
D. e2fsck
Answer: B,D

RedHat   RH133 certification   RH133   RH133   RH133

NO.18 You want to temporarily change your primary group to another group of which you are a member. In
this process, a new shell will be created, and when you exit the shell, your previous group will be
reinstated. Which of the following commands will you use to accomplish this task?
A. chgrp
B. newgrp
C. chmod
D. chown
Answer: B

RedHat   RH133   RH133   RH133   RH133

NO.19 After enabling shadowed passwords in a Linux server, where does Linux keep the passwords?
A. /usr/shadow
B. /etc/passwd
C. /usr/passwd
D. /etc/shadow
Answer: D

RedHat answers real questions   RH133 pdf   RH133

NO.20 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network.
You are a root user on the Linux system. You have to create a user named Trinity and deny interactive
login. Which of the following should you use to accomplish the task?
Each correct answer represents a part of the solution. Choose all that apply.
A. vi /etc/passwd
B. vi /etc/shadow
C. useradd Trinity
D. passwd Trinity
E. Trinity:x:505:505::/home/Trinity:/sbin/nonlogin
Answer: A,B,C,D,E

RedHat   RH133 exam simulations   RH133 certification   RH133 exam   RH133 exam prep

NO.21 Which of the following commands can be used to modify kernel parameters at runtime?
A. sync
B. sysctl
C. mkinitrd
D. lsdev
Answer: B

RedHat   RH133 test   RH133 exam prep   RH133 exam dumps

NO.22 You want only the root access in a Linux computer for maintenance purposes. Which of the following
runlevels will you use to boot the computer?
A. 2
B. 0
C. 1
D. 3
Answer: C

RedHat pdf   RH133 study guide   RH133   RH133 test   RH133

NO.23 CORRECT TEXT
Drag and drop the appropriate command in front of its respective function.
Answer: A

RedHat   RH133 study guide   RH133   RH133   RH133 practice test

NO.24 What is the minimum RAM requirement for installing Red Hat in GUI mode?
A. 1GB
B. 512 MB
C. 128MB
D. 64MB
Answer: C

RedHat   RH133   RH133 certification

NO.25 Which of the following commands displays a module name or filename and associated
information, such as the authors name, license, description, module version, dependencies, parameters,
etc?
A. modprobe
B. lsmod
C. modprob
D. modinfo
Answer: D

RedHat test   RH133 practice test   RH133   RH133

NO.26 You work as a Network Administrator for Secure Web Inc. The company has a Linux-based network.
The network has a mixed set of client operating systems. You want to format a new hard disk drive. The
drive will have only one partition. Both the Linux and Windows operating systems will access the partition.
Which of the following file systems will you use?
A. VFAT
B. XFS
C. REISER
D. EXT3
Answer: A

RedHat   RH133   RH133

NO.27 You want to verify the PGP signature of all headers and signatures associated with an RPM package.
Which of the following commands will you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. rpm -e
B. rpm -K
C. rpm --checksig
D. rpm -V
Answer: B,C,D

RedHat   RH133 questions   RH133   RH133

NO.28 Which of the following commands will you run to list all files that have been modified within the last 60
minutes?
A. find /etc -name *.txt
B. find start -dir -min -60
C. find start -dir -cmin -60
D. find start -cmin -60
Answer: C

RedHat   RH133 answers real questions   RH133 certification   RH133

NO.29 Fill in the blank with the appropriate command.
The ________ command recursively removes files, which have not been accessed for a period oftime.
A. tmpwatch
Answer: A

RedHat   RH133 exam simulations   RH133 exam dumps

NO.30 Which of the following statements are true about kernel modules?
Each correct answer represents a complete solution. Choose all that apply.
A. Kernel modules do not support executable loaders.
B. The kernel module contains extra kernel codes that may be loaded after the loading of the basekernel.
Only a minimal resident kernel is loaded into memory at boot time.
C. Kernel modules do not support the device drivers, network drivers, and file system drivers.
D. Whenever a user requests a feature that is not present in the resident kernel, a kernel moduleis
dynamically loaded into memory.
Answer: B,D

RedHat practice test   RH133 exam simulations   RH133   RH133 exam dumps

With IT-Tests.com's RedHat RH133 exam training materials you can pass the RedHat RH133 exam easily. The training tools which designed by our website can help you pass the exam the first time. You only need to download the IT-Tests.com RedHat RH133 exam training materials, namely questions and answers, the exam will become very easy. IT-Tests.com guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect. Do not hesitate, add the exam material to your shopping cart quickly. If you miss it you will regret for a lifetime.

RedHat certification RH133 the latest exam questions and answers

RedHat RH133 exam is an popular examination of the IT industry , and it is also very important. We prepare the best study guide and the best online service specifically for IT professionals to provide a shortcut. IT-Tests.com RedHat RH133 exam covers all the content of the examination and answers you need to know . Tried Exams ot IT-Tests.com , you know this is something you do everything possible to want, and it is really perfect for the exam preparation.

A lot of IT people want to pass RedHat certification RH133 exams. Thus they can obtain a better promotion opportunity in the IT industry, which can make their wages and life level improved. But in order to pass RedHat certification RH133 exam many people spent a lot of time and energy to consolidate knowledge and didn't pass the exam. This is not cost-effective. If you choose IT-Tests's product, you can save a lot of time and energy to consolidate knowledge, but can easily pass RedHat certification RH133 exam. Because IT-Tests's specific training material about RedHat certification RH133 exam can help you 100% pass the exam. If you fail the exam, IT-Tests.com will give you a full refund.

IT-Tests.com is a website which always provide you the latest and most accurate information about RedHat certification RH133 exam. In order to allow you to safely choose us, you can free download part of the exam practice questions and answers on IT-Tests.com website as a free try. IT-Tests.com can ensure you 100% pass RedHat certification RH133 exam.

Exam Code: RH133
Exam Name: RedHat (Red Hat Linux System Administration)

What are you waiting for? Opportunity knocks but once. You can get RedHat RH133 complete as long as you enter IT-Tests.com website. You find the best RH133 exam training materials, with our exam questions and answers, you will pass the exam.

RH133 (Red Hat Linux System Administration) Free Demo Download: http://www.it-tests.com/RH133.html

NO.1 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network.
You are a root user on the Linux system. You have to create a user named Trinity and deny interactive
login. Which of the following should you use to accomplish the task?
Each correct answer represents a part of the solution. Choose all that apply.
A. vi /etc/passwd
B. vi /etc/shadow
C. useradd Trinity
D. passwd Trinity
E. Trinity:x:505:505::/home/Trinity:/sbin/nonlogin
Answer: A,B,C,D,E

RedHat exam   RH133 test answers   RH133 questions   RH133   RH133

NO.2 You work as a Linux Technician for Tech Perfect Inc. The company has a Linux-based network.
You have configured a database server in the network. Users complain that the server has
become remarkably slow. However, the previous day, the server was performing well. You know that
some of the processes may be the cause of the issue. You run the PS command on the server. In the
result set, which information will you look at that suggests the problematic process?
A. A high load average
B. A high process ID
C. A low load average
D. A low CPU time
E. A high CPU time
Answer: E

RedHat exam prep   RH133   RH133 braindump

NO.3 You want to make Rick an owner of the files TRADE1.TXT and TRDREPORT.TXT. Which of the
following commands will you use to accomplish this?
A. chown rick TRADE1.TXT TRDREPORT.TXT
B. chgrp rick TRADE1.TXT + TRDREPORT.TXT
C. chown rick TRADE1.TXT + TRDREPORT.TXT
D. chgrp rick TRADE1.TXT TRDREPORT.TXT
Answer: A

RedHat   RH133   RH133   RH133 answers real questions   RH133

NO.4 You want to verify the PGP signature of all headers and signatures associated with an RPM package.
Which of the following commands will you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. rpm -e
B. rpm -K
C. rpm --checksig
D. rpm -V
Answer: B,C,D

RedHat   RH133   RH133   RH133 demo   RH133 pdf   RH133 exam

NO.5 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to run the cc process at
runlevel three. If the order of execution of cc command is 43, which of the following commands will John
use to accomplish his task?
A. ln -s /etc/init.d/cc /etc/rc.d/rc3.d/K43cc
B. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/K43cc
C. ln -s /etc/rc.d/cc /etc/rc.d/rc3.d/s43cc
D. ln -s /etc/rc.d/init.d/cc /etc/rc.d/rc3.d/S43cc
Answer: D

RedHat demo   RH133   RH133   RH133   RH133

NO.6 You want only the root access in a Linux computer for maintenance purposes. Which of the following
runlevels will you use to boot the computer?
A. 2
B. 0
C. 1
D. 3
Answer: C

RedHat   RH133   RH133 certification training   RH133 questions   RH133

NO.7 By default, which of the following commands configures the current run level?
A. chkconfig
B. pstree
C. service
D. ntsysv
Answer: D

RedHat certification training   RH133   RH133 exam prep

NO.8 CORRECT TEXT
Drag and drop the appropriate command in front of its respective function.
Answer: A

RedHat exam simulations   RH133 test   RH133

NO.9 You work as a Network Administrator for Rick Inc. The company has a Linux-based network. You are
configuring a Linux server. Which of the following bootloaders does not require to be rewritten after the
configuration of the kernel has been changed?
A. GRUB
B. BOOTP
C. LILO
D. ELILO
Answer: A

RedHat   RH133   RH133   RH133   RH133 braindump

NO.10 Which of the following fsck commands will you use to check all filesystems listed in /etc/fstab?
A. fsck -P
B. fsck -f
C. fsck -A
D. fsck -y
Answer: C

RedHat practice test   RH133   RH133   RH133 test

NO.11 Which of the following commands can be used to compress a file?
Each correct answer represents a complete solution. Choose all that apply.
A. gzip
B. compress
C. tar
D. zip
Answer: A,B,D

RedHat test   RH133   RH133 pdf   RH133   RH133

NO.12 You work as a Software Engineer for McNiel Inc. The company has a Linux-based network. The
company has 150 Engineers. The root user has configured quota limits for each user. You want to view
quota limits for your system. Which of the following commands will you use to accomplish this task?
A. repquota -a
B. quota -v
C. quotacheck
D. edquota
Answer: B

RedHat braindump   RH133 study guide   RH133   RH133 exam prep   RH133

NO.13 You work as a Network Administrator for Secure Web Inc. The company has a Linux-based network.
The network has a mixed set of client operating systems. You want to format a new hard disk drive. The
drive will have only one partition. Both the Linux and Windows operating systems will access the partition.
Which of the following file systems will you use?
A. VFAT
B. XFS
C. REISER
D. EXT3
Answer: A

RedHat   RH133   RH133

NO.14 Which of the following commands displays a module name or filename and associated
information, such as the authors name, license, description, module version, dependencies, parameters,
etc?
A. modprobe
B. lsmod
C. modprob
D. modinfo
Answer: D

RedHat   RH133   RH133 pdf   RH133 exam prep   RH133 certification

NO.15 You work as a Network Administrator for Tech Perfect Inc. The company has a Linux-based network.
You are configuring a server that will be used as a file server. You want to install an RPM package, named
FILELOCATOR, on the server. You want to check whether the package is already installed. Which of the
following commands will you use?
A. grep FILELOCATOR
B. find -q rpm |grep FILELOCATOR
C. rpm -qa | grep FILELOCATOR
D. find FILELOCATOR
Answer: C

RedHat study guide   RH133 test   RH133 certification training   RH133

NO.16 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. He is working as a root user on the Linux operating system. He wants to add a soft limit quota
warning for the users, in which, after exceeding the quota value, a user will receive e-mail warnings about
being over quotA. Which of the following commands will John use to accomplish his task?
Each correct answer represents a complete solution. Choose all that apply.
A. repquota
B. quotaon
C. warnquota
D. edquota
E. quotaoff
Answer: C,D

RedHat dumps   RH133 exam prep   RH133 questions   RH133 exam dumps

NO.17 Fill in the blank with the appropriate command.
The ________ command recursively removes files, which have not been accessed for a period oftime.
A. tmpwatch
Answer: A

RedHat answers real questions   RH133   RH133 certification   RH133

NO.18 Which of the following commands can be used to modify kernel parameters at runtime?
A. sync
B. sysctl
C. mkinitrd
D. lsdev
Answer: B

RedHat certification training   RH133 demo   RH133

NO.19 Which of the following commands can be used to check the errors of the ext2 and ext3
filesystems?
Each correct answer represents a complete solution. Choose two.
A. fsck --ext2
B. fsck.ext3
C. fsck --ext3
D. e2fsck
Answer: B,D

RedHat exam   RH133   RH133

NO.20 Which of following options will you use to force mtr to display numeric IP numbers and not try to
resolve the host names?
A. -t
B. -n
C. -l
D. -p
Answer: B

RedHat demo   RH133   RH133 original questions

NO.21 After enabling shadowed passwords in a Linux server, where does Linux keep the passwords?
A. /usr/shadow
B. /etc/passwd
C. /usr/passwd
D. /etc/shadow
Answer: D

RedHat   RH133 braindump   RH133   RH133 study guide

NO.22 What is the minimum RAM requirement for installing Red Hat in GUI mode?
A. 1GB
B. 512 MB
C. 128MB
D. 64MB
Answer: C

RedHat certification   RH133   RH133 exam simulations   RH133 answers real questions

NO.23 Which of the following commands will you run to list all files that have been modified within the last 60
minutes?
A. find /etc -name *.txt
B. find start -dir -min -60
C. find start -dir -cmin -60
D. find start -cmin -60
Answer: C

RedHat   RH133   RH133   RH133 dumps   RH133 braindump

NO.24 When installing RHEL in the graphical interface, which of the following switches can be used to specify
a resolution?
A. lowers
B. vnc
C. resolution
D. skipddc
Answer: C

RedHat certification training   RH133 answers real questions   RH133 exam dumps

NO.25 Which of the following commands is used to create a user account for a new user?
A. USERMOD
B. MOUNT
C. USERADD
D. CRUSER
Answer: C

RedHat demo   RH133   RH133 dumps   RH133   RH133 test

NO.26 You work as a System Administrator for McNeil Inc. The company has a Linux based network.
You are a root user on Red Hat operating system. You have upgraded the amount of RAM in your system
from 256 MB to 512 MB, but there is only 512 MB of swap space. Therefore, you want to add more swap
space to /dev/hdb2 hard drive to run the applications that require a large amount of memory. Which of the
following commands should you run to accomplish this task? Each correct answer represents a complete
solution. Choose all that apply.
A. mkswap /dev/hdb2
B. swapon /dev/hdb2
C. mount
D. parted
Answer: A,B,D

RedHat study guide   RH133   RH133   RH133 original questions   RH133

NO.27 Which of the following statements are true about kernel modules?
Each correct answer represents a complete solution. Choose all that apply.
A. Kernel modules do not support executable loaders.
B. The kernel module contains extra kernel codes that may be loaded after the loading of the basekernel.
Only a minimal resident kernel is loaded into memory at boot time.
C. Kernel modules do not support the device drivers, network drivers, and file system drivers.
D. Whenever a user requests a feature that is not present in the resident kernel, a kernel moduleis
dynamically loaded into memory.
Answer: B,D

RedHat certification   RH133 answers real questions   RH133 exam   RH133 practice test

NO.28 After creating the swap area, which of the following commands will you need to run to start using it?
A. mkswap
B. mkfs
C. swapon
D. swapoff
Answer: C

RedHat certification training   RH133 braindump   RH133 test answers   RH133 certification

NO.29 You work as a Network Administrator for Net World International. The company has a Linux-based
network. You want to upgrade an RPM package and get the status during the upgrade. Which of the
following commands will you use to accomplish the task?
A. rpm -ivh
B. rpm -evh
C. rpm -qvh
D. rpm -Uvh
Answer: D

RedHat   RH133   RH133   RH133

NO.30 You want to temporarily change your primary group to another group of which you are a member. In
this process, a new shell will be created, and when you exit the shell, your previous group will be
reinstated. Which of the following commands will you use to accomplish this task?
A. chgrp
B. newgrp
C. chmod
D. chown
Answer: B

RedHat test questions   RH133 exam prep   RH133 exam prep

IT-Tests's experienced expert team has developed effective training program a for RedHat certification RH133 exam, which is very fit for candidates. IT-Tests.com provide you the high quality product, which can let you do simulation test before the real RedHat certification RH133 exam. So you can take a best preparation for the exam.

Best RedHat RH-302 test training guide

IT-Tests's products can not only help you successfully pass RedHat certification RH-302 exams, but also provide you a year of free online update service，which will deliver the latest product to customers at the first time to let them have a full preparation for the exam. If you fail the exam, we will give you a full refund.

Passing RedHat certification RH-302 exam is not simple. Choose the right training is the first step to your success and choose a good resource of information is your guarantee of success. While the product of IT-Tests.com is a good guarantee of the resource of information. If you choose the IT-Tests.com product, it not only can 100% guarantee you to pass RedHat certification RH-302 exam but also provide you with a year-long free update.

Exam Code: RH-302
Exam Name: RedHat (Red Hat Certified Engineer on Redhat Enterprise Linux 5 (Labs))

Are you still upset about how to pass RedHat certification RH-302 exam? Are you still waiting for the latest information about RedHat certification RH-302 exam? IT-Tests.com has come up with the latest training material about RedHat certification RH-302 exam. Do you want to pass RedHat certification RH-302 exam easily? Please add IT-Tests's RedHat certification RH-302 exam practice questions and answers to your cart now! IT-Tests.com has provided part of RedHat certification RH-302 exam practice questions and answers for you on www.IT-Tests.com and you can free download as a try. I believe you will be very satisfied with our products. With our products you can easily pass the exam. We promise that if you have used IT-Tests's latest RedHat certification RH-302 exam practice questions and answers exam but fail to pass the exam, IT-Tests.com will give you a full refund.

IT-Tests.com is a very good website to provide a convenient service for the RedHat certification RH-302 exam. IT-Tests's products can help people whose IT knowledge is not comprehensive pass the difficulty RedHat certification RH-302 exam. If you add the RedHat certification RH-302 exam product of IT-Tests.com to your cart, you will save a lot of time and effort. IT-Tests's product is developed by IT-Tests's experts' study of RedHat certification RH-302 exam, and it is a high quality product.

Although there are other online RedHat RH-302 exam training resources on the market, but the IT-Tests.com's RedHat RH-302 exam training materials are the best. Because we will be updated regularly, and it's sure that we can always provide accurate RedHat RH-302 exam training materials to you. In addition, IT-Tests.com's RedHat RH-302 exam training materials provide a year of free updates, so that you will always get the latest RedHat RH-302 exam training materials.

RH-302 (Red Hat Certified Engineer on Redhat Enterprise Linux 5 (Labs)) Free Demo Download: http://www.it-tests.com/RH-302.html

NO.1 mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the
value from /etc/sysctl.conf.
5. Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6. neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky from redhat. Actually is giving scenario to you to implement quota to neo user. You should
apply the quota to neo user on /home that neo user shouldn't occupied space more than 70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0
To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and
grpquota for group quota.
2. touch /home/aquota.user ->Creating blank quota database file.
3. mount -o remount /home-> Remounting the /home with updated mount options.
You can verify that /home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ->Initialization the quota on /home
5. edquota -u neo /home-> Quota Policy editor
See the snapshot
Disk quotas for user neo (uid 500):
Filesystem blocks soft hard inodes soft hard
/dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7. One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial
Size of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without
losing any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of
Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without
unmount as well as we can bring the actual size of Logical Volume on online using ext2online command.
8. Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially,physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalRH302 sized chunks known as Physical
Extents (PE). As there are several other concepts associated with the LVM system, let's start with some
basic definitions:
. Physical Volume (PV) is the standard partition that you add to the LVM mix.
Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
. Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
. Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
. Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
. Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf.-> To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13. You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window)
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address
are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to System working as a router for
two networks have IP Address 192.168.0.254 and 192.168.1.254.
To get the hosts on 192.168.1.0/24 should go through 192.168.0.254.
15. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
12. mkswap /dev/hda? ->To create Swap File system on partition.
13. swapon /dev/hda? ->To enable the Swap space from partition.
14. free -m ->Verify Either Swap is enabled or not.
15. vi /etc/fstab
/dev/hda? swap swap defaults 0 0
16. Reboot the System and verify that swap is automatically enabled or not.
16. You are a System administrator. Using Log files very easy to monitor the system.
Now there are 50 servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs
from all servers into on LOG Server. How will you configure the LOG Server to accept logs from remote
host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from other host
configure:
1. vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
17. You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You changed the
root password, again unable to login as a root.
How will you make Successfully Login as a root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:
. Boot the System on Single user mode.
. Change the password
. Check the account expire date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
1. Check the file /etc/securetty Which file blocked to root login from certain terminal.
2. If terminal is deleted or commented write new or uncomment.
3. Reboot the system and login as a root.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.2 Change the root Password to redtophat
Answer and Explanation:
1. Boot the system in Single user mode

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.3 Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com This will set the host name only for current session. To set hostname
permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.4 Either Reboot or use partprobe command.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.5 Type the Size: +100M-> You can Specify either Last cylinder of Size here.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.6 Verify by mounting on current Sessions also:

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.7 Or

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.8 You are giving RHCT Exam and in your Exam paper there is a written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network What, What is written here. Actually here are these parameters.
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
- Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.9 Write:

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.10 Use mkfs -t ext3 /dev/hda? Where ? is your partition number

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.11 Use the passwd command
2. Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is 172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
#dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer translate
domain names such as www.Redhat.com to IP addresses such as 216.148.218.197. As no individual
DNS server is large enough to keep a database for the entire Internet, they can refer requests to other
DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium Users wants to access by name so DNS
will interpret the name into ip address. You need to specify the Address if DNS server in each and every
client machine. In Redhat Enterprise Linux, you need to specify the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.12 Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda-> To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.13 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.14 Press P to verify the partitions lists and remember the partitions name.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.15 /dev/hda? /mnt/neo ext3 defaults 1 2

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.16 vi /etc/fstab

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.17 The System you are using is for NFS (Network File Services). Some important data are shared from
your system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session, we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or
ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.18 mkdir /mnt/neo

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.19 Press w to write on partitions table.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

NO.20 mke2fs -j /dev/hda? To create ext3 filesystem.

RedHat study guide   RH-302 certification training   RH-302   RH-302 exam dumps   RH-302

You can free download part of IT-Tests's practice questions and answers about RedHat certification RH-302 exam online. Once you decide to select IT-Tests, IT-Tests.com will make every effort to help you pass the exam. If you find that our exam practice questions and answers is very different form the actual exam questions and answers and can not help you pass the exam, we will immediately 100% full refund.