显示标签为“MSC-131”的博文。显示所有博文
显示标签为“MSC-131”的博文。显示所有博文

2014年3月6日星期四

最新のMotorola Solutions MSC-131試験の問題集

いまMSC-131認定試験の過去問問題集や参考書を必要とするでしょう。仕事に忙しいですから、試験の準備をする時間が足りないでしょう。ですから、効率が良い試験MSC-131参考書が必要です。もちろん、よりよく試験の準備をするように、自分に相応しいツールを選択するのは一番大事なことです。これは試験に合格できるかどうかに関連する大切な問題です。ですから、JPexamのMSC-131問題集を選択してください。

最もリラックスした状態ですべての苦難に直面しています。Motorola SolutionsのMSC-131試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。JPexamのMotorola SolutionsのMSC-131試験トレーニング資料は私達を助けられます。JPexamがそばにいてくれると、恐くなくなり、迷わなくなります。JPexamのMotorola SolutionsのMSC-131試験トレーニング資料は私達受験生の最良の選択です。

Motorola Solutions MSC-131認証試験に合格することが簡単ではなくて、Motorola Solutions MSC-131証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

試験番号:MSC-131問題集
試験科目:Design and Deploy AirDefense Solutions
最近更新時間:2014-03-06
問題と解答:全103問
100%の返金保証。1年間の無料アップデート。

JPexamはMotorola SolutionsのMSC-131認定試験に対して問題集を提供しておるサイトで、現場のMotorola SolutionsのMSC-131試験問題と模擬試験問題集を含みます。ほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

JPexamは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。JPexamが提供して差し上げたのは高品質のMotorola SolutionsのMSC-131模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。JPexamのMotorola SolutionsのMSC-131試験問題集は絶対あなたに成功をもたらすことを保証します。JPexamのMotorola SolutionsのMSC-131認定試験に準備するために色々な方法がありますが、

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/MSC-131_exam.html

NO.1 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions参考書   MSC-131   MSC-131認定試験   MSC-131認定証   MSC-131参考書   MSC-131

NO.2 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions   MSC-131参考書   MSC-131問題集

NO.3 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions   MSC-131   MSC-131

NO.4 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions   MSC-131認定資格   MSC-131認定試験   MSC-131参考書   MSC-131

NO.5 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions認定証   MSC-131参考書   MSC-131過去問   MSC-131練習問題

NO.6 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions問題集   MSC-131   MSC-131問題集   MSC-131   MSC-131参考書

NO.7 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions認証試験   MSC-131認定試験   MSC-131問題集   MSC-131

NO.8 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions   MSC-131   MSC-131参考書   MSC-131認定資格

NO.9 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

Motorola Solutions   MSC-131認定試験   MSC-131   MSC-131認証試験   MSC-131過去問

NO.10 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions認証試験   MSC-131過去問   MSC-131認証試験   MSC-131認定証

NO.11 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131   MSC-131練習問題   MSC-131過去問   MSC-131参考書

NO.12 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions   MSC-131   MSC-131   MSC-131練習問題   MSC-131

NO.13 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions   MSC-131参考書   MSC-131過去問   MSC-131   MSC-131   MSC-131認証試験

NO.14 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions問題集   MSC-131過去問   MSC-131参考書

NO.15 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions   MSC-131過去問   MSC-131過去問   MSC-131問題集

JPexamは最新の400-051問題集と高品質の70-487問題と回答を提供します。JPexamの70-323 VCEテストエンジンとC_TFIN22_64試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP0-J63 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/MSC-131_exam.html

2013年9月15日星期日

Motorola Solutions MSC-131 training and testing

Having a Motorola Solutions MSC-131 certification can enhance your employment prospects,and then you can have a lot of good jobs. IT-Tests.com is a website very suitable to candidates who participate in the Motorola Solutions certification MSC-131 exam. IT-Tests.com can not only provide all the information related to the Motorola Solutions certification MSC-131 exam for the candidates, but also provide a good learning opportunity for them. IT-Tests.com be able to help you pass Motorola Solutions certification MSC-131 exam successfully.

IT-Tests.com provide different training tools and resources to prepare for the Motorola Solutions MSC-131 exam. The preparation guide includes courses, practice test, test engine and part free PDF download.

Exam Code: MSC-131
Exam Name: Motorola Solutions (Design and Deploy AirDefense Solutions)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 103 Questions and Answers
Last Update: 2013-09-15

IT-Tests's Motorola Solutions certification MSC-131 exam testing exercises is very similar with real exam questions. If you choose IT-Tests's testing practice questions and answers, we will provide you with a year of free online update service. IT-Tests.com can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.

IT-Tests.com's training materials can test your knowledge in preparing for the exam, and can evaluate your performance within a fixed time. The instructions given to you for your weak link, so that you can prepare for the exam better. The IT-Tests.com's Motorola Solutions MSC-131 exam training materials introduce you many themes that have different logic. So that you can learn the various technologies and subjects. We guarantee that our training materials has tested through the practice. IT-Tests.com have done enough to prepare for your exam. Our material is comprehensive, and the price is reasonable.

If you choose to sign up to participate in Motorola Solutions certification MSC-131 exams, you should choose a good learning material or training course to prepare for the examination right now. Because Motorola Solutions certification MSC-131 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.

Never say you can not do it. This is my advice to everyone. Even if you think that you can not pass the demanding Motorola Solutions MSC-131 exam. You can find a quick and convenient training tool to help you. IT-Tests.com's Motorola Solutions MSC-131 exam training materials is a very good training materials. It can help you to pass the exam successfully. And its price is very reasonable, you will benefit from it. So do not say you can't. If you do not give up, the next second is hope. Quickly grab your hope, itis in the IT-Tests.com's Motorola Solutions MSC-131 exam training materials.

MSC-131 (Design and Deploy AirDefense Solutions) Free Demo Download: http://www.it-tests.com/MSC-131.html

NO.1 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

Motorola Solutions test answers   MSC-131 original questions   MSC-131   MSC-131 exam prep   MSC-131   MSC-131 exam prep

NO.2 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions exam simulations   MSC-131 exam   MSC-131   MSC-131   MSC-131   MSC-131 test questions

NO.3 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions   MSC-131 dumps   MSC-131   MSC-131 test

NO.4 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions   MSC-131 dumps   MSC-131   MSC-131 study guide   MSC-131 study guide

NO.5 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131 test answers   MSC-131   MSC-131

NO.6 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions exam dumps   MSC-131 test questions   MSC-131   MSC-131 original questions   MSC-131

NO.7 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions   MSC-131   MSC-131 practice test   MSC-131 exam

NO.8 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions   MSC-131 certification training   MSC-131 dumps

NO.9 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions exam prep   MSC-131 original questions   MSC-131 test   MSC-131   MSC-131

NO.10 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions exam simulations   MSC-131 test answers   MSC-131 certification   MSC-131 certification training   MSC-131

NO.11 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions   MSC-131   MSC-131 test answers   MSC-131   MSC-131

NO.12 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions answers real questions   MSC-131 pdf   MSC-131 certification training   MSC-131   MSC-131

NO.13 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions practice test   MSC-131 braindump   MSC-131 test questions   MSC-131 test answers

NO.14 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions test answers   MSC-131   MSC-131   MSC-131   MSC-131

NO.15 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions answers real questions   MSC-131   MSC-131 exam dumps

IT-Tests.com offer the latest 70-465 Questions & Answers and high-quality 000-122 PDF Practice Test. Our 700-104 VCE testing engine and HP2-N42 study guide can help you pass the real exam. High-quality 000-225 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/MSC-131.html

2013年6月14日星期五

Free download Motorola Solutions certification MSC-131 exam questions and answers

If you use the IT-Tests.com Motorola Solutions MSC-131 study materials, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. Before you decide to buy our Motorola Solutions MSC-131 exam materials, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff.


If you are sure that you want to pass Motorola Solutions certification MSC-131 exam, then your selecting to purchase the training materials of IT-Tests.com is very cost-effective. Because this is a small investment in exchange for a great harvest. Using IT-Tests's test questions and exercises can ensure you pass Motorola Solutions certification MSC-131 exam. IT-Tests.com is a website which have very high reputation and specifically provide simulation questions, practice questions and answers for IT professionals to participate in the Motorola Solutions certification MSC-131 exam.


I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry. Now the very popular Motorola Solutions MSC-131 authentication certificate is one of them. Although passing the Motorola Solutions certification MSC-131 exam is not so easy, there are still many ways to help you successfully pass the exam. While you can choose to spend a lot of time and energy to review the related IT knowledge, and also you can choose a effective training course. IT-Tests.com can provide the pertinent simulation test,which is very effective to help you pass the exam and can save your precious time and energy to achieve your dream. IT-Tests.com will be your best choice.


Exam Code: MSC-131

Exam Name: Motorola Solutions (Design and Deploy AirDefense Solutions)

IT-Tests.com has a huge IT industry elite team. They all have high authority in the IT area. They use professional knowledge and experience to provide training materials for people ready to participate in different IT certification exams. The accuracy rate of exam practice questions and answers provided by IT-Tests.com is very high and they can 100% guarantee you pass the exam successfully for one time. Besides, we will provide you a free one-year update service.


We all well know the status of Motorola Solutions certification MSC-131 exams in the IT area is a pivotal position, but the key question is to be able to get Motorola Solutions MSC-131 certification is not very simple. We know very clearly about the lack of high-quality and high accuracy exam materials online. Exam practice questions and answers IT-Tests.com provide for all people to participate in the IT industry certification exam supply all the necessary information. Besides, it can all the time provide what you want. Buying all our information can guarantee you to pass your first Motorola Solutions certification MSC-131 exam.


With IT-Tests's help, you do not need to spend a lot of money to participate in related cram or spend a lot of time and effort to review the relevant knowledge, but can easily pass the exam. Simulation test software of Motorola Solutions MSC-131 exam is developed by IT-Tests's research of previous real exams. IT-Tests's Motorola Solutions MSC-131 exam practice questions have a lot of similarities with the real exam practice questions.


When you select to use IT-Tests's products, you have set the first foot on the peak of the IT industry and the way to your dream is one step closer. The practice questions of IT-Tests.com can not only help you pass Motorola Solutions certification MSC-131 exam and consolidate your professional knowledge, but also provide you one year free update service.


MSC-131 (Design and Deploy AirDefense Solutions) Free Demo Download: http://www.it-tests.com/MSC-131.html


NO.1 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A

Motorola Solutions exam prep   MSC-131   MSC-131 practice test

NO.2 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A

Motorola Solutions   MSC-131 test questions   MSC-131   MSC-131

NO.3 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C

Motorola Solutions   MSC-131   MSC-131 braindump   MSC-131 test   MSC-131 exam   MSC-131 answers real questions

NO.4 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D

Motorola Solutions dumps   MSC-131   MSC-131   MSC-131 exam prep

NO.5 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D

Motorola Solutions   MSC-131   MSC-131   MSC-131   MSC-131 answers real questions

NO.6 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D

Motorola Solutions   MSC-131 certification training   MSC-131 dumps   MSC-131

NO.7 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D

Motorola Solutions   MSC-131   MSC-131   MSC-131   MSC-131 certification

NO.8 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C

Motorola Solutions   MSC-131   MSC-131 certification   MSC-131

NO.9 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B

Motorola Solutions original questions   MSC-131   MSC-131 exam simulations   MSC-131   MSC-131 practice test   MSC-131

NO.10 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C

Motorola Solutions   MSC-131 exam dumps   MSC-131 practice test   MSC-131 questions   MSC-131 exam simulations   MSC-131 exam dumps

NO.11 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C

Motorola Solutions   MSC-131 exam prep   MSC-131   MSC-131 exam simulations   MSC-131

NO.12 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A

Motorola Solutions certification   MSC-131   MSC-131 pdf   MSC-131

NO.13 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D

Motorola Solutions exam simulations   MSC-131   MSC-131 original questions   MSC-131

NO.14 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C

Motorola Solutions certification training   MSC-131 exam dumps   MSC-131 study guide   MSC-131 test

NO.15 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C

Motorola Solutions study guide   MSC-131 practice test   MSC-131   MSC-131 demo

Having a Motorola Solutions certification MSC-131 exam certificate can help people who are looking for a job get better employment opportunities in the IT field and will also pave the way for a successful IT career for them.