難しい070-506-VB認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はJPexamです。JPexamの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべての070-506-VB試験問題集に対する無料なdemoがあります。JPexamの070-506-VB問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
JPexamの070-506-VB問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。JPexamの問題集には、実際の試験に出る可能性がある問題が全部含まれていますから、問題集における問題を覚える限り、簡単に試験に合格することができます。これは試験に合格する最速のショートカットです。仕事に忙しいから試験の準備をする時間はあまりないとしたら、絶対JPexamの070-506-VB問題集を見逃すことはできないです。これはあなたが070-506-VB試験に合格できる最善で、しかも唯一の方法ですから。
我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。JPexam Microsoftの070-506-VB試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れない070-506-VB勉強資料を提供するというサイトがあるかもしれませんが、JPexamはあなたに高品質かつ最新のMicrosoftの070-506-VBトレーニング資料を提供するユニークなサイトです。JPexamの勉強資料とMicrosoftの070-506-VBに関する指導を従えば、初めてMicrosoftの070-506-VB認定試験を受けるあなたでも一回で試験に合格することができます。
試験番号：070-506-VB問題集
試験科目：TS: Microsoft Silverlight 4, Development
最近更新時間：2014-04-09
問題と解答：全75問
100％の返金保証。1年間の無料アップデート。
JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
現在の社会で人材があちこちいます。IT領域でも同じです。コンピュータの普及につれて、パソコンを使えない人がほとんどいなくなります。ですから、IT業界で勤めているあなたはプレッシャーを感じていませんか。学歴はどんなに高くてもあなたの実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。IT職員としているあなたがどうやって自分自身の実力を養うのですか。IT認定試験を受験するのは一つの良い方法です。070-506-VB試験を通して、あなたは新しいスキルをマスターすることができるだけでなく、070-506-VB認証資格を取得して自分の高い能力を証明することもできます。最近、Microsoft 070-506-VB試験の認証資格がとても人気があるようになりましたが、受験したいですか。
Microsoftの070-506-VB認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。JPexamは認定で優秀なIT資料のウエブサイトで、ここでMicrosoft 070-506-VB認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。
Microsoftの070-506-VBのオンラインサービスのスタディガイドを買いたかったら、JPexamを買うのを薦めています。JPexamは同じ作用がある多くのサイトでリーダーとしているサイトで、最も良い品質と最新のトレーニング資料を提供しています。弊社が提供したすべての勉強資料と他のトレーニング資料はコスト効率の良い製品で、サイトが一年間の無料更新サービスを提供します。ですから、弊社のトレーニング製品はあなたが試験に合格することを助けにならなかったら、全額で返金することを保証します。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/070-506-VB_exam.html
NO.1 Private Sub worker_ProgressChanged(sender As Object, e As ProgressChangedEventArgs)
NO.2 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerReportsProgress = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.ProgressChanged, New ProgressChangedEventHandler(AddressOf
worker_ProgressChanged)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 Dim isChecked As Boolean = checkBox.IsChecked.HasValue AndAlso
checkBox.IsChecked.Value
10 ExecuteLongRunningProcessStep(isChecked)
11 worker.ReportProgress(i)
12 Next
NO.3 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerSupportsCancellation = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.RunWorkerCompleted, New RunWorkerCompletedEventHandler(AddressOf
worker_Completed)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 InvokeLongRunningProcessStep()
10 Next
11 End Sub
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 09?
A. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
B. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
C. Dim cancel = e.Cancel
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
D. Dim cancel = e.Cancel
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
Answer: B
Microsoft認証試験 070-506-VB 070-506-VB 070-506-VB
NO.4 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference only.)
01 Private Sub HandleCheck(sender As Object, e As RoutedEventArgs)
02 MessageBox.Show("Checked")
03 End Sub
04
05 Private Sub HandleUnchecked(sender As Object, e As RoutedEventArgs)
06 MessageBox.Show("Unchecked")
07 End Sub
08
09 Private Sub HandleThirdState(sender As Object, e As RoutedEventArgs)
10 MessageBox.Show("Indeterminate")
11 End Sub
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B
Microsoft認定試験 070-506-VB 070-506-VB過去問
NO.5 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type.
You define the Person class according to the following code segment.
Public Class Person
Public Property Name() As String
Public Property Description() As String
Public Property Gender() As String
Public Property Age() As Integer
Public Property Weight() as Integer
End Class
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A
Microsoft 070-506-VB認定証 070-506-VB 070-506-VB問題集 070-506-VB問題集
NO.6 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 Dim client = New MyService.MyServiceClient()
02 AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args) QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
client.GetQuoteOfTheDayAsync()
B. AddHandler client.GetQuoteOfTheDayCompleted,Sub(s, args)
If args.Result IsNot Nothing Then
QuoteOfTheDay.Text = args.Result
Else
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
C. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
Try
client.GetQuoteOfTheDayAsync()
Catch ex As Exception
' TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
End Try
D. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
If args.[Error] Is Nothing Then
QuoteOfTheDay.Text = args.Result
Else
' TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
Answer: D
Microsoft 070-506-VB参考書 070-506-VB 070-506-VB練習問題
NO.7 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The code-behind file contains the following code segment. (Line numbers are included for reference only.)
06 Private Sub PrintText(sender As Object, args As SelectionChangedEventArgs)
07
08 MessageBox.Show("You selected " + cbi.Content.ToString() + ".")
09 End Sub
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
Answer: A
Microsoft 070-506-VB練習問題 070-506-VB認定資格 070-506-VB認証試験
NO.8 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. AddHandler txtName.KeyDown, New KeyEventHandler ( AddressOf txtName_KeyDown)
B. AddHandler txtName.LostFocus, New RoutedEventHandler(AddressOf txtName_LostFocus)
C. AddHandler txtName.TextChanged, New TextChangedEventHandler(AddressOf
txtName_TextChanged)
D. Private Sub txtName_TextChanged(sender As Object, e As TextChangedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
E. Private Sub txtName_KeyDown(sender As Object, e As KeyEventArgs)
'Custom logic
If e.Key = Key.F2 Then
End If
End Sub
F. Private Sub txtName_LostFocus(sender As Object, e As RoutedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
Answer: AE
Microsoft認定資格 070-506-VB 070-506-VB 070-506-VB認定試験 070-506-VB
NO.9 You are developing a Silverlight 4 application.
You define the visual behavior of a custom control in the ControlTemplate by defining a VisualState object
named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState(Me, "Selected", True)
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. Public Shared ReadOnly SelectedProperty As DependencyProperty =
DependencyProperty.Register("Selected", GetType(VisualState), GetType(MyControl), Nothing)
Public Property Selected As VisualState
Get
Return GetValue(SelectedProperty)
End Get
Set(ByVal value As VisualState)
SetValue(SelectedProperty, value)
End Set
End Property
Answer: A
Microsoft 070-506-VB問題集 070-506-VB 070-506-VB
NO.10 End Sub
You attempt to run the application. You receive the following error message:
"Invalid cross-thread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 09 with the following code segment.
Dim b = CType(checkBox.GetValue(CheckBox.IsCheckedProperty), System.Nullable(Of Boolean))
Dim isChecked As Boolean = b.HasValue AndAlso b.Value
B. Replace line 09 with the following code segment.
Dim isChecked As Boolean = False
Dispatcher.BeginInvoke(Function()
isChecked = checkBox.IsChecked.HasValue AndAlso checkBox.IsChecked.Value
End Function)
C. Replace line 15 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, (e.ProgressPercentage + "%"))
D. Replace line 15 with the following code segment.
Dispatcher.BeginInvoke(Function()
statusTextBlock.Text = e.ProgressPercentage + "%"
End Function)
Answer: B
Microsoft問題集 070-506-VB参考書 070-506-VB練習問題 070-506-VB
13. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl Inherits Control
02
03 Public Property Title() As String
04 Get
05 Return DirectCast(GetValue(TitleProperty), String)
06 End Get
07 Set
08 SetValue(TitleProperty, value)
09 End Set
10 End Property
11 End Class
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 02?
A. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), Nothing)
B. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Title"))
C. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Untitled"))
D. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(String),
GetType(MyControl), New PropertyMetadata(New PropertyChangedCallback(Sub(depObj, args)
depObj.SetValue(MyControl.TitleProperty, "Untitled")
End Sub)))
Answer: C
Microsoft練習問題 070-506-VB認証試験 070-506-VB認定証
14. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl
02 Inherits Control
03
04 Public ReadOnly Property ChildElements As List(Of FrameworkElement)
05 Get
06 Return DirectCast(GetValue(MyControl.ChildElementsProperty), List(Of FrameworkElement))
07 End Get
08 End Property
09 Public Sub New()
10
11 End Sub
12
13 Shared Sub New()
14
15 End Sub
16 End Class
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New PropertyMetadata(New
List(Of FrameworkElement)()))
B. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New
PropertyMetadata(Nothing))
C. Add the following code segment at line 10.
SetValue(MyControl.ChildElementsProperty, New List(Of
FrameworkElement)())
D. Add the following code segment at line 14.
ChildElementsProperty = DependencyProperty.Register("ChildElements",
GetType(List(Of FrameworkElement)), GetType(MyControl), New
PropertyMetadata(New List(Of FrameworkElement)()))
Answer: BC
Microsoft 070-506-VB認定資格 070-506-VB問題集 070-506-VB認証試験 070-506-VB認証試験 070-506-VB
15. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Dim outerCanvas = New Canvas()
02 Dim innerCanvas = New Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = New Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D
Microsoft認証試験 070-506-VB認定証 070-506-VB認定試験
NO.11 End Sub
NO.12 You are developing a Silverlight 4 application.
You define an Invoice object according to the following code segment.
Public Class Invoice
Public Property InvoiceId() As Integer
Public Property Amount() As Double
Public Property Supplier() As Supplier
Public Property InvoiceDate() As DateTime
Public Property PayDate() As DateTime
Public Property InvoiceDescription() As String
End Class
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D
Microsoft 070-506-VB 070-506-VB 070-506-VB
NO.13 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 Sub getOrders_Click(ByVal sender As Object, ByVal e As RoutedEventArgs)
02 Dim context As New NorthwindEntities()
03
04 Dim query = From order In context.Orders Select order
05
06 End Sub
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Dim obsCollection = New ObservableCollection(Of Order)
B. Add the following code segment at line 03.
Dim dsOrders As New DataServiceCollection(Of Order)
AddHandler dsOrders.LoadCompleted, New EventHandler(Of LoadCompletedEventArgs)(Sub(dsc, args)
ordersViewSource.Source = dsOrders
End Sub)
C. Add the following code segment at line 05.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 05.
dsOrders.Load(query)
E. Add the following code segment at line 05.
query.ToList().ForEach(Sub(o) obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: BC
Microsoft 070-506-VB参考書 070-506-VB認定証
NO.14 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The code-behind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 Public Sub New()
02 InitializeComponent()
03
04 Dim control As UserControl = New MyCustomControl()
05
06 End Sub
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 05?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
C. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D
Microsoft 070-506-VB 070-506-VB
NO.15 statusTextBlock.Text = Convert.ToString(e.ProgressPercentage) & "%"
NO.16 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown" Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the code-behind file of the control. (Line numbers are included for
reference only.)
01 Private Sub App_KeyDown(ByVal sender As Object, ByVal e As KeyEventArgs)
02
03 End Sub
04
05 Private Sub FirstAndLastNameKeyDown()
06 '...
07 End Sub
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 02?
A. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
B. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
C. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
D. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
Answer: C
Microsoft 070-506-VB 070-506-VB 070-506-VB参考書
JPexamは最新の1z0-822問題集と高品質の000-N32問題と回答を提供します。JPexamの642-467 VCEテストエンジンと000-619試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の74-335 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论