JPexamが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、Microsoftの070-642試験も一年の無料アップデートになっています。
070-642認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、070-642認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。JPexamの問題集を利用することは正にその最良の方法です。JPexamはあなたが必要とするすべての070-642参考資料を持っていますから、きっとあなたのニーズを満たすことができます。JPexamのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験070-642参考書を見つけてください。
試験の準備をするためにJPexamのMicrosoftの070-642試験トレーニング資料を買うのは冒険的行為と思ったとしたら、あなたの人生の全てが冒険なことになります。一番遠いところへ行った人はリスクを背負うことを恐れない人です。また、JPexamのMicrosoftの070-642試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。JPexamのMicrosoftの070-642試験トレーニング資料を利用したらきっと成功できますから、JPexamを選ばない理由はないです。
070-642認証試験に合格することは他の世界の有名な認証に合格して国際の承認と受け入れを取ることと同じです。070-642認定試験もIT領域の幅広い認証を取得しました。世界各地で070-642試験に受かることを通じて自分のキャリアをもっと向上させる人々がたくさんいます。JPexamで、あなたは自分に向いている製品をどちらでも選べます。
この情報の時代の中に、たくさんのIT機構はMicrosoftの070-642認定試験に関する教育資料がありますけれども、受験生がこれらのサイトを通じて詳細な資料を調べられなくて、対応性がなくて受験生の注意 に惹かれなりません。
試験番号：070-642問題集
試験科目：TS: Windows Server 2008 Network Infrastructure, Configuring Certification
最近更新時間：2014-02-13
問題と解答：全400問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/070-642_exam.html
NO.1 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A
Microsoft 070-642 070-642 070-642練習問題 070-642認定資格
NO.2 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C
Microsoft 070-642認定試験 070-642問題集 070-642 070-642 070-642
NO.3 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D
Microsoft認定試験 070-642練習問題 070-642練習問題 070-642認証試験
NO.4 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B
Microsoft問題集 070-642 070-642 070-642
NO.5 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A
Microsoft練習問題 070-642問題集 070-642参考書 070-642
NO.6 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D
Microsoft 070-642問題集 070-642 070-642
NO.7 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B
Microsoft参考書 070-642 070-642参考書 070-642認定資格 070-642
NO.8 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A
Microsoft問題集 070-642 070-642 070-642過去問
NO.9 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D
Microsoft 070-642 070-642参考書 070-642認定試験 070-642
NO.10 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D
Microsoft 070-642 070-642 070-642参考書
NO.11 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A
Microsoft問題集 070-642 070-642 070-642
NO.12 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B
Microsoft 070-642問題集 070-642
NO.13 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B
Microsoft 070-642 070-642認定試験
NO.14 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C
Microsoft過去問 070-642 070-642 070-642参考書
NO.15 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B
Microsoft認定証 070-642過去問 070-642 070-642 070-642
NO.16 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A
Microsoft 070-642練習問題 070-642練習問題
NO.17 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C
Microsoft参考書 070-642練習問題 070-642認定試験
NO.18 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A
Microsoft 070-642 070-642認定試験
NO.19 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C
Microsoft認定資格 070-642認定証 070-642 070-642問題集 070-642
NO.20 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B
Microsoft認定資格 070-642 070-642
JPexamは最新の000-585問題集と高品質のJN0-633問題と回答を提供します。JPexamのE20-891 VCEテストエンジンとE20-553試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のBAS-002 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论