2014年2月3日星期一

自信満々とCitrix 1Y0-350認定試験を受験しよう

JPexamを選択したら100%試験に合格することができます。試験科目の変化によって、最新の試験の内容も更新いたします。JPexamのインターネットであなたに年24時間のオンライン顧客サービスを無料で提供して、もしあなたはJPexamに失敗したら、弊社が全額で返金いたします。

Citrixの1Y0-350の認定試験に合格すれば、就職機会が多くなります。JPexamはCitrixの1Y0-350の認定試験の受験生にとっても適合するサイトで、受験生に試験に関する情報を提供するだけでなく、試験の問題と解答をはっきり解説いたします。

JPexamの1Y0-350問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。Citrix試験の重要なの一環として、1Y0-350認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JPexamは試験に失敗した場合は全額返金を約束しますから、1Y0-350試験に合格することができるように、はやくJPexamのウェブサイトに行ってもっと詳細な情報を読んでください。

JPexamのCitrixの1Y0-350試験トレーニング資料の知名度が非常に高いことを皆はよく知っています。JPexam は世界的によく知られているサイトです。どうしてこのような大きな連鎖反応になりましたか。それはJPexamのCitrixの1Y0-350試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。

試験番号:1Y0-350問題集
試験科目:Citrix NetScaler 10 Essentials and Networking
最近更新時間:2014-02-03
問題と解答:全126問
100%の返金保証。1年間の無料アップデート。

しかし、1Y0-350試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、JPexamは君に向ける知識を提供いたします。JPexamの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたに1Y0-350試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。

1Y0-350試験はCitrixの認定試験の一つですが、もっとも重要なひとつです。Citrixの1Y0-350の認定試験に合格するのは簡単ではなくて、JPexamは1Y0-350試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、JPexamから君に合ったツールを選択してください。

今は時間がそんなに重要な社会でもっとも少ないお時間を使って試験に合格するのは一番よいだと思います。JPexamが短期な訓練を提供し、一回に君の試験に合格させることができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/1Y0-350_exam.html

NO.1 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix参考書   1Y0-350認証試験   1Y0-350   1Y0-350

NO.2 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B

Citrix   1Y0-350   1Y0-350参考書   1Y0-350認定証   1Y0-350

NO.3 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix問題集   1Y0-350問題集   1Y0-350認定試験

NO.4 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B

Citrix参考書   1Y0-350   1Y0-350認定資格

NO.5 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix練習問題   1Y0-350   1Y0-350認定証

NO.6 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A

Citrix練習問題   1Y0-350   1Y0-350   1Y0-350   1Y0-350練習問題

NO.7 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix   1Y0-350   1Y0-350   1Y0-350認定試験   1Y0-350過去問

NO.8 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-350過去問   1Y0-350   1Y0-350認定証

NO.9 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A

Citrix問題集   1Y0-350   1Y0-350

NO.10 Scenario: An engineer executes the following commands:
add vlan 2 bind vlan 2 -ifnum 1 / 2 add ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress
10.110.4.200 255.255.255.0
What type of IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix問題集   1Y0-350   1Y0-350過去問   1Y0-350   1Y0-350参考書

JPexamは最新の70-492問題集と高品質のBCP-340問題と回答を提供します。JPexamの1Z0-807 VCEテストエンジンとICBB試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のLOT-410 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/1Y0-350_exam.html

没有评论:

发表评论