多くの時間とお金がいらなくて２０時間だけあって楽に一回にXML MasterのI10-002認定試験を合格できます。JPexamが提供したXML MasterのI10-002試験問題と解答が真実の試験の練習問題と解答は最高の相似性があります。
XML MasterのI10-002認定試験に受かる勉強サイトを探しているのなら、JPexamはあなたにとって一番良い選択です。JPexamがあなたに差し上げられるのはIT業種の最先端のスキルを習得したこととXML MasterのI10-002認定試験に合格したことです。この試験は本当に難しいことがみんなは良く知っていますが、試験に受かるのは不可能ではないです。自分に向いている勉強ツールを選べますから。JPexam のXML MasterのI10-002試験問題集と解答はあなたにとって一番良い選択です。JPexamのトレーニング資料は完全だけでなく、カバー率も高くて、高度なシミュレーションを持っているのです。これはさまざまな試験の実践の検査に合格したもので、XML MasterのI10-002認定試験に合格したかったら、JPexamを選ぶのは絶対正しいことです。
試験番号：I10-002問題集
試験科目：XML Master: Professional V2
最近更新時間：2014-01-18
問題と解答：全80問
100％の返金保証。1年間の無料アップデート。
JPexamは実際の環境で本格的なXML MasterのI10-002の試験の準備過程を提供しています。もしあなたは初心者若しくは専門的な技能を高めたかったら、JPexamのXML MasterのI10-002の試験問題があなたが一歩一歩自分の念願に近くために助けを差し上げます。試験問題と解答に関する質問があるなら、当社は直後に解決方法を差し上げます。しかも、一年間の無料更新サービスを提供します。
JPexamの助けのもとで君は大量のお金と時間を费やさなくても復楽にXML MasterのI10-002認定試験に合格のは大丈夫でしょう。ソフトの問題集はJPexamが実際問題によって、テストの問題と解答を分析して出来上がりました。JPexamが提供したXML MasterのI10-002の問題集は真実の試験に緊密な相似性があります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/I10-002_exam.html
NO.1 Push the Exhibit Button to load the referenced "XML Document".
Assume that the character "3" is obtained from the "XML document". Select which XSLT style sheet
correctly performs the transformation. (Multiple answers possible. Select two.)
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[x='1'][y='2'] " />
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[(attribute::x='1') and (text()='3')] " />
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self='3'] " />
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self::*='3'] " />
</xsl:template>
</xsl:stylesheet>
Answer: BD
XML Master過去問 I10-002 I10-002認定証 I10-002参考書
NO.2 Select which of the following correctly describes WSDL. (WSDL 1.1)
A. WSDL assumes SOAP as the message transmission form
B. When WSDL is defined by a combination of style="rpc" and use="encoded", then
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" must be designated
C. When WSDL is defined by a combination of style="rpc" and use="encoded", then the encodingStyle
attribute cannot be designated
D. WSDL may be defined by a combination of style="rpc" and use="literal"
Answer: D
XML Master I10-002過去問 I10-002 I10-002 I10-002 I10-002参考書
NO.3 Push the Exhibit Button to load the referenced "XML Document".
Select which of the following correctly describes the output results of an XSLT transformation of the "XML
Document" using the "XSLT Style Sheet".
Note that the XSLT processor can output transformation results as a document. Line feeds and indents
are not reflected.
A. <record>
<data>100</data>
</record>
B. <record xmlns="urn:xmlmaster:test">
<data>100</data>
</record>
C. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
</record>
D. <record>
<data>100</data>
<data>70</data>
</record>
E. <record xmlns="urn:xmlmaster:test">
<data>100</data>
<data>70</data>
</record>
F. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
<data xmlns= "" >70</data>
</record>
Answer: F
XML Master I10-002練習問題 I10-002
NO.4 Push the Exhibit Button to load the referenced "XML document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML Document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<ZZZ><YYY>lmnop</YYY></ZZZ>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
Answer: A
XML Master問題集 I10-002認定資格 I10-002 I10-002認定資格 I10-002過去問
NO.5 What must you write in XSLT style sheet (1) to process the following "XML Document" and obtain the
following "transform results"? Select the correct answer below. Note that "#" indicates a line feed, and "=*"
indicates a tab.
Assume that the XSLT processor can output transformation results as a document.
A. Nothing needs to be written.
B. <xml:space="preserve"/>
C. <xsl:preserve-space elements="content"/>
D. <xsl:strip-space elements="doc body"/>
Answer: D
XML Master認定試験 I10-002練習問題 I10-002 I10-002 I10-002問題集
NO.6 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<TestML xmlns="urn:xmlmaster:testml">
<record level="1" data="100" />
<record level="2" data="250" />
</TestML>
Choose the XML Schema Document that does not correctly define the structure of the "XML Document".
A. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" tns:testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" tns:record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" tns:recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
B. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
C. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
D. <schema
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml">
<element name="TestML" type="tns:testmlType" />
<complexType name="testmlType">
<sequence>
<element ref="tns:record" maxOccurs="unbounded" />
</sequence>
</complexType>
<element name="record" type="tns:recordType" />
<complexType name="recordType">
<attribute name="level" type="int" />
<attribute name="data" type="int" />
</complexType>
</schema>
Answer: C
XML Master I10-002認定証 I10-002問題集 I10-002参考書 I10-002
NO.7 Which of the following describes the most correct call order of the ContentHandler interface methods
when parsing the following "XML Document" using a non-validating SAX parser? This question reflects
line feeds within the XML document.
[XML Document]
<a>
<b>
c
</b>
</a>
A. startDocument - startElement - characters - startElement - characters - characters - characters -
endElement - characters - endElement - endDocument
B. startDocument - startElement - ignorableWhitespace - startElement - ignorableWhitespace -
characters - ignorableWhitespace - endElement - ignorableWhitespace - endElement - endDocument
C. startDocument - startElement - startElement - characters - endElement - endElement - endDocument
D. startDocument - startElement - startElement - characters - characters - endElement - endElement -
endDocumentW
Answer: A
XML Master認定証 I10-002認定資格 I10-002 I10-002参考書
NO.8 Which of the following correctly describes the DOM (Level 2) Node interface?
A. The Node interface can be used to change the value (nodeValue) of the DOM element node (Element)
B. The Node interface can be used to change the name (nodeName) of the DOM element node (Element)
C. The Node interface can be used to change the value (nodeValue) of the DOM attribute node (Attr)
D. The Node interface can be used to change the name (nodeName) of the DOM attribute node (Attr)
Answer: C
XML Master I10-002過去問 I10-002問題集 I10-002
NO.9 Push the Exhibit Button to load the referenced "XML Document 1" and "XML Document 2," and process
XML using "DOM Processing."
Select which of the following is the most appropriate expression of the results under XML 1.0. Line feeds
and/or indents are not reflected in the results.
A. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " >string value</data>
</root2>
B. <root2 xmlns="urn:xmlmaster:EX2">
<data>string value</data>
</root2>
C. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " />
</root2>
D. <root2 xmlns="urn:xmlmaster:EX2">
<data/>
</root2>
Answer: A
XML Master問題集 I10-002 I10-002 I10-002 I10-002練習問題 I10-002
NO.10 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<lmnop/>
Or
<lmnop></lmnop>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="<xsl:value-of select='.'/>"/>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="{ . }"/>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="."/>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:text disable-output-escaping="no"><</xsl:text>
<xsl:value-of select="."/>
<xsl:text disable-output-escaping="no">/></xsl:text>
</xsl:template>
</xsl:stylesheet>
Answer: B
XML Master I10-002 I10-002過去問 I10-002練習問題 I10-002 I10-002
JPexamは最新のC_HANAIMP_1問題集と高品質の700-302問題と回答を提供します。JPexamのMB6-871 VCEテストエンジンと1z0-457試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB3-701 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论