あなたは自分の職場の生涯にユニークな挑戦に直面していると思いましたら、SCPのSC0-411の認定試験に合格することが必要になります。JPexamはSCPのSC0-411の認定試験を真実に、全面的に研究したサイトです。JPexam のユニークなSCPのSC0-411の認定試験の問題と解答を利用したら、試験に合格することがたやすくなります。JPexamは認証試験の専門的なリーダーで、最全面的な認証基準のトレーニング方法を追求して、１００パーセントの成功率を保証します。JPexamのSCPのSC0-411の試験問題と解答は当面の市場で最も徹底的かつ正確かつ最新な模擬テストです。それを利用したら、初めに試験を受けても、合格する自信を持つようになります。
SC0-411はSCPのひとつの認証で、SC0-411がSCPに入るの第一歩として、SC0-411試験がますます人気があがって、SC0-411に参加するかたもだんだん多くなって、しかしSC0-411認証試験に合格することが非常に難しいで、君はSC0-411に関する試験科目の問題集を購入したいですか？
JPexamはSCPのSC0-411認定試験に関する包括的な資料を提供します。当社のトレーニング資料は専門家が研究した最新の研究資料です。JPexamを利用したら、あなたはいつでも最新の問題集と解答を持つことができます。当社のトレーニングツールは定期的に更新しますから、常に変わっている試験の目標に従っています。実際には成功は遠くないです。JPexamが与えた道に沿って、あなたの成功への独自の道に行くことができるようになります
試験番号：SC0-411問題集
試験科目：Hardening the Infrastructure (HTI)
最近更新時間：2014-04-16
問題と解答：全410問
100％の返金保証。1年間の無料アップデート。
偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。JPexamはあなたがSCPのSC0-411認定試験に合格する確保です。JPexam のトレーニング試験は問題と解答に含まれています。しかも１００パーセントの合格率を保証できます。JPexamのSCPのSC0-411試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。
あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。最近、SCPのSC0-411試験は非常に人気のある認定試験です。あなたもこの試験の認定資格を取得したいのですか。さて、はやく試験を申し込みましょう。JPexamはあなたを助けることができますから、心配する必要がないですよ。
SC0-411認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。それはJPexamのSC0-411問題集を利用することです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/SC0-411_exam.html
NO.1 You have recently hired an assistant to help you with managing the security of your
network. You are currently running an all Windows environment, and are
describing NTFS permission issues. You are using some demonstration files to help
with your discussion. You have two NTFS partitions, C:\ and D:\ There is a test file,
C:\DIR1\test.txt that is currently set so that only Administrators have Full Control.
If you move this file to the C:\DIR2 folder, what will the permissions be for this file?
A. The file will have the same permissions as D:\DIR2
B. The file permissions will remain the same
C. The file permissions will be lost
D. The file permissions will convert to Everyone - Full Control
E. The permissions will be set to whatever the CREATOR OWNER permissions are for
the D:\ partition
Answer: B
SCP問題集 SC0-411認証試験 SC0-411認定資格 SC0-411 SC0-411参考書
NO.2 You are creating the contingency plan for the network in hospital where you just
started working. The network has about 300 PCs, about 50 Servers, and is
interconnected into some of the critical patient systems for monitoring purposes.
What is the appropriate level of backup power for this type of network?
A. Building Generator
B. Personal UPS
C. Alternative Fuel-Cell Technology
D. Server Rack UPS
E. Electrical Company
Answer: A
SCP SC0-411認定証 SC0-411 SC0-411 SC0-411
NO.3 Which of the following fields are found in a user account's line in the /etc/passwd
file?
A. The User Identifier assigned to the user account
B. The home directory used by the user account
C. The number of days since the user account password was changed
D. The full name for the user account
E. The number of days until the user account's password must change
Answer: ABD
SCP SC0-411認定試験 SC0-411
NO.4 You are configuring a wildcard mask for the subnet 10.12.24.0 / 255.255.248.0.
Which of the following is the wildcard mask to use for this subnet?
A. 0.255.255.255
B. 10.12.24.255
C. 0.0.248.0
D. 255.255.248.0
E. 0.0.7.255
Answer: E
SCP SC0-411参考書 SC0-411 SC0-411参考書
NO.5 You are configuring the dial up options in your Windows 2000 network. While you
do so, you are studying the configuration options available to you. You notice the
term RADIUS used often during your research. What does RADIUS provide?
A. RADIUS is used to define the implementation method of Kerberos in a network.
B. RADIUS is used to define the implementation method of PKI in a network.
C. RADIUS is used to define the implementation method of Biometrics in a network.
D. RADIUS is a standard that provides authorization, authentication, identification, and
accounting services.
E. RADIUS is a standard that defines the methods used to secure the connections
between a dialup client and a dialup server.
Answer: D
SCP認定資格 SC0-411過去問 SC0-411参考書 SC0-411問題集
NO.6 When a new user account is created in Linux, what values are assigned?
A. Shell_GID
B. SetGID
C. SetUID
D. UID
E. GID
Answer: DE
SCP SC0-411参考書 SC0-411 SC0-411問題集
NO.7 One way to find out more about a company's infrastructure layout is to send email
to a non-existent user of the target organization. When this email bounces back as
undeliverable, you can read the message source. Which of the following pieces of
information can be derived from the returned message source?
A. Target company's email server's hostname.
B. Target company's email server's public IP address.
C. Target company's internal IP addressing scheme.
D. Target company's email server's application name and version, if provided.
E. Target company's employees' email addresses.
Answer: ABD
SCP過去問 SC0-411 SC0-411 SC0-411過去問
NO.8 In order to add to your layered defense, you wish to implement some security
configurations on your router. If you wish to have the router work on blocking TCP
SYN attacks, what do you add to the end of an ACL statement?
A. The IP addresses for allowed networks
B. The port range of allowed applications
C. The word Established
D. The word Log
E. The string: no service udp-small-servers
Answer: C
SCP認定試験 SC0-411 SC0-411 SC0-411認定資格
NO.9 You are in the process of securing several new machines on your Windows 2000
network. To help with the process Microsoft has defined a set of Security Templates
to use in various situations. Which of the following best describes the Basic Security
Template?
A. This template is provided as a way to reverse the implementation of different
Windows 2000 security settings, except for user rights.
B. This template is provided so that Local Users have ideal security settings, while Power
Users have settings that are compatible with NT 4 Users.
C. This template is provided to implement suggested security settings for all security
areas, except for the following: files, folders, and Registry keys.
D. This template is provided to create the maximum level of security for network traffic
between Windows 2000 clients.
E. This template is provided to allow for an administrator to run legacy applications on a
DC.
Answer: A
SCP問題集 SC0-411認定資格 SC0-411参考書 SC0-411認定資格 SC0-411
NO.10 As you become more involved in the security and networking of your organization,
you wish to learn the exact details of the protocols in use. It is suggested to you, by a
friend, that you check the RFC for each protocol. What is an RFC?
A. An RFC is a program that has a searchable index to troubleshoot network problems.
B. An RFC is a document that discusses issues surrounding the Internet, networking
technologies, and/or networking protocols.
C. An RFC is a hidden resource, which can be called up via the Windows Help file to
identify details about networking protocols.
D. An RFC is a single document that details all the communications protocols and
technologies used on the Internet.
E. An RFC is a single document that details all the communications protocols and
technologies used on an Intranet.
Answer: B
SCP認定証 SC0-411 SC0-411 SC0-411認定試験 SC0-411過去問
NO.11 When you took over the security responsibilities at your office, you noticed there
were no warning banners on any of the equipment. You have decided to create a
warning login banner on your Cisco router. Which of the following shows the
correct syntax for the banner creation?
A. banner login C Restricted access. Only authorized users allowed to access this device.
B. login banner C Restricted access. Only authorized users allowed to access this device.
C. banner login Restricted access. Only authorized users allowed to access this device.
D. login banner Restricted access. Only authorized users allowed to access this device.
E. banner logging C Restricted access. Only authorized users allowed to access this
device. C
Answer: A
SCP問題集 SC0-411 SC0-411
NO.12 In a TCP Header, what is the function of the first sixteen bits?
A. To define the type
B. To define the IP Version
C. To define the destination port number
D. To define the upper layer protocol
E. To define the source port number
Answer: E
SCP SC0-411 SC0-411参考書 SC0-411
NO.13 You are configuring the IP addressing for your network. One of the subnets has
been defined with addresses already. You run ifconfig on a host and determine that
it has an address of 172.18.32.54 with a mask of 255.255.254.0. What is the network
ID to which this host belongs?
A. 172.18.0.0
B. 0.0.32.0
C. 172.0.0.0
D. 172.18.32.32
E. 172.18.32.0
Answer: E
SCP認定資格 SC0-411 SC0-411過去問 SC0-411
NO.14 In order to perform promiscuous mode captures using the Ethereal capture tool on
a Windows 2000 machine, what must first be installed?
A. IPv4 stack
B. IPv6 stack
C. WinPcap
D. Nothing, it will capture by default
E. At least two network adapters
Answer: C
SCP SC0-411認証試験 SC0-411 SC0-411認証試験
NO.15 You are creating the contingency plan, and are trying to take into consideration as
many of the disasters as you can think of. Which of the following are examples of
technological disasters?
A. Hurricane
B. Terrorism
C. Tornado
D. Virus
E. Trojan Horse
Answer: BDE
SCP認定証 SC0-411 SC0-411認定資格
NO.16 You wish to add a new group to your Linux system. The group is called
SCNP_Admins, and is to be given a Group Identifier of 1024. What is the correct
command to add this new group?
A. addgroup SCNP_Admins -id 1024
B. groupadd -g 1024 SCNP_Admins
C. addgroup SCNP_Admins id/1024
D. groupadd id/1024 g/SCNP_Admins
E. groupadd g/1024 SCNP_Admins
Answer: B
SCP SC0-411過去問 SC0-411認証試験 SC0-411練習問題
NO.17 The exhibit shows a router with three interfaces E0, E1 and S0. Interfaces E0 and
E1 are connected to internal networks 192.168.10.0 and 192.168.20.0 respectively
and interface S0 is connected to the Internet.
The objective is to allow two hosts, 192.168.20.16 and 192.168.10.7 access to the
Internet while all other hosts are to be denied Internet access. All hosts on network
192.168.10.0 and 192.168.20.0 must be allowed to access resources on both internal
networks. From the following, select all the access list statements that are required
to make this possible.
A. access-list 53 permit 192.168.20.16 0.0.0.0
B. access-list 80 permit 192.168.20.16 0.0.0.0
C. access-list 53 deny 0.0.0.0 255.255.255.255
D. access-list 80 permit 192.168.10.7 0.0.0.0
E. int S0, ip access-group 53 out
F. int S0, ip access-group 80 out
Answer: BDF
SCP SC0-411 SC0-411
NO.18 You work for a mid sized ISP on the West Coast of the United Kingdom. Recently
you have noticed that there are an increasing number of attacks on the Internet
routers used in the company. The routers are physically secured well, so you can be
somewhat confident the attacks are all remote. Which of the following are legitimate
threats the routers are facing, under this situation?
A. Damaged Cables
B. False Data Injection
C. Social Engineering
D. Unauthorized Remote Access
E. Denial of Service
Answer: BDE
SCP SC0-411 SC0-411
NO.19 You are reviewing the Xinetd configuration file for the ftp service. If the following
line found in this file, what is the line's function?
redirect = 192.168.10.1 3456
A. That only 192.168.10.1 can make ftp requests
B. That only hosts in the 192.168.10.0/24 network can make ftp requests
C. That only 3456 connections are allowed to the ftp service on 192.168.10.1
D. That the overall Xinetd configuration has redirect lines in it
E. That the ftp service is redirected to IP 192.168.10.1 on port 3456
Answer: E
SCP練習問題 SC0-411参考書 SC0-411問題集
NO.20 In the last few days, users have reported to you that they have each received two
emails from an unknown source with file attachments. Fortunately the users have
listened to your training and no one has run the attached program. You study the
attachment on an isolated computer and find that it is a program that is designed to
execute a payload when the system clock registers 10:10 PM on February 29. Which
of the following best identifies the type of program is the attachment?
A. Mail Bomb
B. Logic Bomb
C. Polymorphic Virus
D. Stealth Virus
E. Polymorphic Trojan
Answer: B
SCP練習問題 SC0-411問題集 SC0-411過去問 SC0-411問題集 SC0-411 SC0-411練習問題
NO.21 In your network, you manage a mixed environment of Windows, Linux, and UNIX
computers. The clients run Windows 2000 Professional and Windows NT 4.0
Workstation, while the Servers are UNIX and Linux based with custom
applications. During routine administration you successfully ping several nodes in
the network. During this you are running a packet capture for further analysis.
When examining one of the frames you notice that the Ethernet address for the
source is 1ED0.097E.E5E9 and that for the destination is 1ED0.096F.5B13. From
this information you gather that:
A. They are in different networks
B. The destination address is in the 1ED0 subnet
C. The network cards are by the same manufacturer
D. The destination address is in the 1ED0.09AA subnet
E. The source and destination share the same MAC subnet
Answer: C
SCP SC0-411認定試験 SC0-411 SC0-411
NO.22 What is the function of the HFNetChk tool from Microsoft?
A. To check for the current Hotfixes that are available from Microsoft
B. It is an upgrade to the Windows Update tool for checking on all updates
C. It is the tool that must be run prior to installing IIS 5.0
D. It is the tool that checks the network configuration of all web servers
E. To record what Hotfixes and service packs are running on the Windows machine
Answer: E
SCP SC0-411 SC0-411
NO.23 Which of the following is implemented in an IPv6 environment, which helps to
increase security?
A. EFS
B. IPsec
C. Caching
D. S/MIME
E. Destination and Source Address Encryption
Answer: B
SCP SC0-411過去問 SC0-411
NO.24 In Windows 2000, there are four methods of implementing IPSec. They are:
1. Require Security
2 - Request Security
3 - Respond Only
4 - No IPSec Policy
Your network hosts many servers, and different security policies are in place in
different locations in the network. The Clients and Servers in your network are
configured as follows:
-You have servers numbered 1-9, which have a policy stating they require no
network traffic security.
-You have servers numbered 10-19, which have a policy stating they are not
required to be secure, but will encrypt network traffic if the client is able to receive
it.
-You have servers numbered 20-29, which have a policy stating they are required to
be secure and all network traffic they deliver must be secured.
-You have clients numbered 60-79 that are required to access secure servers 20-29.
-You have clients numbered 80-99 that are not required to access secure servers
20-29, but are required to access servers 1-9 and 10-19.
Based on the Client and Server configuration provided above, which of the
following computers will implement IPSec method 2?
A. Computers numbered 1-9
B. Computers numbered 10-19
C. Computers numbered 20-29
D. Computers numbered 60-79
E. Computers numbered 80-99
Answer: B
SCP SC0-411 SC0-411 SC0-411認定証
NO.25 In order to properly manage the network traffic in your organization, you need a
complete understanding of protocols and networking models. In regards to the
7-layer OSI model, what is the function of the Transport Layer?
A. The Transport layer allows two applications on different computers to establish, use,
and end a session. This layer establishes dialog control between the two computers in a
session, regulating which side transmits, plus when and how long it transmits.
B. The Transport layer manages logical addresses. It also determines the route from the
source to the destination computer and manages traffic problems, such as routing, and
controlling the congestion of data packets.
C. The Transport layer packages raw bits from the Physical (Layer 1) layer into frames
(structured packets for data). Physical addressing (as opposed to network or logical
addressing) defines how devices are addressed at the data link layer. This layer is
responsible for transferring frames from one computer to another, without errors. After
sending a frame, it waits for an acknowledgment from the receiving computer.
D. The Transport layer transmits bits from one computer to another and regulates the
transmission of a stream of bits over a physical medium. For example, this layer defines
how the cable is attached to the network adapter and what transmission technique is used
to send data over the cable.
E. The Transport layer handles error recognition and recovery. It also repackages long
messages, when necessary, into small packets for transmission and, at the receiving end,
rebuilds packets into the original message. The corresponding Transport layer at the
receiving end also sends receipt acknowledgments.
Answer: E
SCP認定資格 SC0-411認定証 SC0-411 SC0-411認証試験 SC0-411練習問題 SC0-411認定資格
NO.26 If an attacker uses a program that sends thousands of email messages to every user
of the network, some of them with over 50MB attachments. What are the possible
consequences to the email server in the network?
A. Server hard disk can fill to capacity
B. Client hard disks can fill to capacity
C. Server can completely crash
D. Network bandwidth can be used up
E. Clients cannot receive new email messages
Answer: AC
SCP SC0-411 SC0-411練習問題 SC0-411 SC0-411
NO.27 If you wish to change the permissions of a parent directory in your Linux system,
and want the permissions to be changed on the files and subdirectories in the parent
directory to be the same, what switch must you use?
A. -G
B. -R
C. -P
D. -S
E. -F
Answer: B
SCP過去問 SC0-411 SC0-411 SC0-411
NO.28 You have recently installed an Apache Web server on a Red Hat Linux machine.
When you return from lunch, you find that a colleague has made a few
configuration changes. One thing you notice is a .htpasswd file. What is the function
of this file?
A. It is a copy of the /etc/passwd file for Web access
B. It is a copy of the etc/shadow file for Web access
C. It is a listing of all anonymous users to the Web server
D. It is a listing of http users and passwords for authentication
E. It is a database file that can be pulled remotely via a web interface to identify currently
logged in users.
Answer: D
SCP認証試験 SC0-411 SC0-411 SC0-411 SC0-411 SC0-411参考書
NO.29 You are configuring the Access Lists for your new Cisco Router. The following are
the commands that are entered into the router for the list configuration.
Router(config)#access-list 145 deny tcp any 10.10.0.0 0.0.255.255 eq 80
Router(config)#access-list 145 deny tcp any 10.10.0.0 0.0.255.255 eq 119
Router(config)#access-list 145 permit ip any any
Router(config)#interface Serial 0
Router(config-if)#ip access-group 145 in
Router(config-if)#interface Ethernet 0
Router(config-if)# ip access-group 145 in
Router(config-if)#interface Ethernet 1
Router(config-if)# ip access-group 145 in
Router(config-if)#interface Ethernet 2
Router(config-if)# ip access-group 145 in
Based on this configuration, and using the exhibit, select the answers that identify
what the list will accomplish.
A. Permit network 10.10.10.0 to access NNTP on the Internet
B. Permit network 10.10.10.0 to access NNTP on network 10.10.11.0
C. Permit network 10.10.10.0 to access NNTP on network 10.10.12.0
D. Deny network 10.10.10.0 to access Internet WWW sites
E. Permit network 10.10.10.0 to access Internet WWW sites
Answer: AE
SCP参考書 SC0-411 SC0-411 SC0-411認証試験
NO.30 If you are looking for plain-text ASCII characters in the payload of a packet you
capture using Network Monitor, which Pane will provide you this information?
A. Summary Pane
B. Packet Pane
C. Collection Pane
D. Hex Pane
E. Detail Pane
Answer: D
SCP過去問 SC0-411認定証 SC0-411認定資格 SC0-411
JPexamは最新のVCAW510問題集と高品質の000-N32問題と回答を提供します。JPexamのJN0-692 VCEテストエンジンと70-415試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC4040-225 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论