全てのIT専門人員はOracleの1Z0-058の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Oracleの1Z0-058の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。JPexamのOracleの1Z0-058試験トレーニング資料を利用したら、望むことを取得できます。
あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやく1Z0-058認定試験を申し込んで認証資格を取りましょう。Oracleの認定試験はIT領域における非常に大切な試験です。Oracleの1Z0-058認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。JPexamの1Z0-058参考資料はあなたの目標を達成するのに役立ちます。
Oracleの1Z0-058認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。Oracleの1Z0-058試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。JPexamのOracleの1Z0-058試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
チャンスは常に準備ができあがった者に属します。しかし、我々に属する成功の機会が来たとき、それをつかむことができましたか。Oracleの1Z0-058認定試験を受験するために準備をしているあなたは、JPexamという成功できるチャンスを掴みましたか。JPexamの1Z0-058問題集はあなたが楽に試験に合格する保障です。この問題集は大量な時間を節約させ、効率的に試験に準備させることができます。JPexamの練習資料を利用すれば、あなたはこの資料の特別と素晴らしさをはっきり感じることができます。この問題集は間違いなくあなたの成功への近道で、あなたが十分に1Z0-058試験を準備させます。
1Z0-058認定試験はたいへん難しい試験ですね。しかし、難しい試験といっても、試験を申し込んで受験する人が多くいます。なぜかと言うと、もちろん1Z0-058認定試験がとても大切な試験ですから。IT職員の皆さんにとって、この試験の1Z0-058認証資格を持っていないならちょっと大変ですね。この認証資格はあなたの仕事にたくさんのメリットを与えられ、あなたの昇進にも助けになることができます。とにかく、これは皆さんのキャリアに大きな影響をもたらせる試験です。こんなに重要な試験ですから、あなたも受験したいでしょう。
JPexamが提供したOracleの1Z0-058トレーニング資料を利用したら、Oracleの1Z0-058認定試験に受かることはたやすくなります。JPexamがデザインしたトレーニングツールはあなたが一回で試験に合格することにヘルプを差し上げられます。 JPexamのOracleの1Z0-058トレーニング資料即ち問題と解答をダウンロードする限り、気楽に試験に受かることができるようになります。まだ困っていたら、我々の試用版を使ってみてください。ためらわずに速くあなたのショッピングカートに入れてください。でないと、絶対後悔しますよ。
試験番号：1Z0-058問題集
試験科目：Oracle Real Application Clusters 11g Release 2 and Grid Infrastructure Administration
最近更新時間：2014-03-25
問題と解答：全139問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/1Z0-058_exam.html
NO.1 After evaluating the various methods for extending a cluster, you decide to use addNode.sh.
The cluster originally consisted of four nodes: RACNODE1, RACNODE2, RACNODE3, and RACNODE4.
Now two nodes called RACNODES and RACNODE6 have been installed and connected to the cluster by
OS administrations.
Which three actions should be performed to check whether the new nodes are ready for running
addNode.sh and to help correct any problems?
A. cluvfy stage -pre crsinst -n RACNODE5/ RACNODE6 -C + DATA -q +VOTE -orainv
B. <oinstall group> -fixup -verbose
C. cluvfy stage -post hwos -n RACNODE5, RACNODE6 -verbose
D. cluvfy comp peer -refnode RACNODE1-n RACNODE5, RACNODE6 -orainv <oinstall group> osdba
<asmdba group> -verbose
E. cluvfy stage -post hwos -n all -verbose
F. cluvfy stage -pre nodeadd -nRACNODE5, RACNODE6 -fixup
G. cluvfy comp peer -refnode RACNODES -n RACNODE6 -orainv <oinstall group> -osdba <asmdba
group> -verbose
Answer: C,D,F
Oracle 1Z0-058認定資格 1Z0-058認定試験 1Z0-058練習問題
NO.2 Which two statements are true about ACFS snapshots?
A. They can be created for ACFS file systems only if the ASM disk group hosting the ADVM volume file
used by the file system has free space available.
B. They can be created for ACFS file systems only if the ADVM volume file used by the file system has
free space available.
C. They can be created only if the ASM disk group hosting the ADVM volume used by the file system has
no other ASM files contained in the disk group.
D. They can be created when ACFS is used both on clusters and on stand-alone servers.
E. They are accessible only on the cluster node that was used when creating the snapshot.
Answer: B,D
Oracle 1Z0-058 1Z0-058認定証 1Z0-058参考書 1Z0-058 1Z0-058
NO.3 Your four-node cluster was originally purchased, installed, and configured three years ago. You
recently added another four nodes to the cluster.
Now you want to remove two of the older nodes that are still accessible to be redeployed elsewhere in the
data center. Which two are true regarding the procedure for removing one or more cluster nodes?
A. The procedure requires that all commands be invoked from one of the surviving cluster nodes.
B. All commands are run as root regardless of which nodes are used to invoke them.
C. The procedure requires that some commands be invoked on the node or nodes to be removed and
that some be invoked from all surviving cluster nodes.
D. The procedure requires that some commands be invoked on the node or nodes to be removed and
that some be invoked from one surviving cluster node.
E. Some commands require that the name of the node or nodes to be removed are passed as arguments,
and some commands require the name of existing nodes to be passed.
Answer: D,E
Oracle 1Z0-058認証試験 1Z0-058認定試験 1Z0-058
NO.4 You are in the planning stages for upgrading your Oracle RAC database from Oracle Database 10g
Release 2 to Oracle Database 11g Release 2 to run under the Oracle Grid Infrastructure.
You decide to use an administrator-managed configuration because the cluster is fairly small.
Which statement is correct about this configuration?
A. A parent pool of the GENERIC server pool will be used.
B. You must define a new server pool called MANUAL.
C. A subpool of the GENERIC server pool will be used.
D. A subpool of the FREE server pool will be used.
Answer: C
Oracle 1Z0-058認定証 1Z0-058 1Z0-058認定証 1Z0-058練習問題
NO.5 Your cluster Is subject to a service-level agreement that allows for little scheduled down time You want
to use patching and maintenance methods that permit the Oracle Grid Infrastructure and Oracle RAT
Databases to be available as much as possible.
Which two techniques will work some or all of the time to provide you with minimum down time?
A. rolling upgradeable and in place patch sets
B. idling upgradeable and out of place patch bundles
C. rolling upgradeable and out of place patch sets
D. rolling upgradeable and in place patch bundles
E. rolling upgradeable and out of place one-off patches
Answer: C,D
Oracle 1Z0-058 1Z0-058参考書 1Z0-058
NO.6 Which four statements are true about ADVM interoperability?
A. Using fdisk or similar disk utilities to partition ADVM-managed volumes is not supported
B. On Linux platforms, the raw utility can be used to map ADVM volume block devices to raw volume
devices.
C. The creation of multipath devices over ADVM devices is not supported.
D. You may create ASMLIB devices over ADVM devices to simplify volume management.
E. ADVM does not support ASM storage contained in Exadata.
F. F. ADVM volumes cannot be used as a boot device or arootfile system.
Answer: A,C,E,F
Oracle認定証 1Z0-058 1Z0-058認証試験 1Z0-058
NO.7 You enter the following command: crsctl status resource MyApp
You get this output: NAME=MyApp
TYPE=cluster_resource TARGET=ONLINE STATE=ONLINE on RACNODE4
MyApp is a policy-managed resource using a server pool with two nodes called RACNODE3 and
RACNODE4 and has a cardinality of 1.
What are the meanings of the target and state status values?
A. MyApp is currently active on RACNODE4 and is meant to be active only on RACNODE4.
B. MyApp is meant to be active, is currently active on RACNODE4, but the Grid Infrastructure may start
MyApp on RACNODE3 due to failovers.
C. MyApp is active on RACNODE4 and was manually started.
D. MyApp should also be online on RACNODE3 because it is a cluster_resources type that must be
active on at least two nodes in the cluster, thereby overriding the CARDINALITY attribute.
Answer: B
Oracle認定資格 1Z0-058 1Z0-058 1Z0-058 1Z0-058
NO.8 You want to reorganize the DATA diskgroup while continuing database operations. The DATA
diskgroup was created using normal redundancy having one disk per failure group. The two disks used
are /dev/sdal and /dev/sda2.
You plan to drop the existing disks and add the /dev/sdb1 and /dev/sdb2 disks to failure group FG_C and
the /dev/sdcl and /dev/sdc2 disks to failure group FG_D.
Which procedure would you use to minimize the effect of the I/Os of this reorganization on ongoing
database operations?
A. Set rebalance power to 0 for diskgroup DATA.
Add failure group FG_C with all the /dev/sdb disks.
Add failure group FG_D with all the /dev/sdc disks.
Drop disks/dev/sda1 and /dev/sda2.
Set rebalance power to 1 for diskgroup DATA.
B. Set rebalance power to 0 for diskgroup DATA.
Add failure group FG_C with all the /dev/sdb disks.
Add failure group FG_D with all the /dev/sdb disks.
Drop disks/dev/sda1 and /dev/sda2.
Set rebalance power to 9 for diskgroup DATA.
C. Set rebalance power to 9 for diskgroup DATA. Add failure group FG_C with all the /dev/sdb disks.
Add failure group FG_D with all the /dev/sdc disks.
Drop disks /dev/sda1 and /dev/sda2.
Set rebalance power to 0 for diskgroup DATA.
D. Set rebalance power to 0 for diskgroup DATA
Drop disks /dev/sdal and /dev/sdb disks.
Add failure group FG_C with all the /dev/sdb disks.
Add failure group FG_D with all the /dev/sdc disks
Set rebalance power to 1 for diskgroup DATA.
Answer: A
Oracle 1Z0-058 1Z0-058認定試験 1Z0-058練習問題
NO.9 Which two network addresses are required to be static, non-dhcp addresses when using the Grid
Naming?
A. GNS VIP Address
B. SCAN VIP Address
C. Node VIP Address
D. Node Public Address
E. Node Private Address
Answer: A,D
Oracle 1Z0-058 1Z0-058過去問 1Z0-058
NO.10 Which two Cluster ware stack administration actions must be performed as the root user?
A. checking the health of the Clusterware on one node
B. starting the Clusterware manually on one node
C. disabling the Clusterware from automatic start at node reboot
D. checking the health and viability of the Clusterware on all nodes
E. listing the location of the voting disks
Answer: B,C
Oracle 1Z0-058 1Z0-058 1Z0-058 1Z0-058認定証
NO.11 Some new non-ASM shared storage has been made available by the storage administrator, and the
Oracle Grid Infrastructure administrator decides to move the voting disks, which do not reside in ASM, to
this new non-ASM location. How can this be done?
A. by running crsctl add css votedisk <path_to_new_location> followed by crsctl delete css votedisk
<path_to_old_location>
B. by running crsctl replace css votedisk <path_to_old_location,path_to_new_location>
C. by running srvctl replace css votedisk <path_to_old_location, path_to_new_location>
D. by running srvctl add css votedisk <path_to_new_location> followed by srvctl delete css votedisk
<path_to_old_location>
Answer: A
Oracle認定資格 1Z0-058 1Z0-058問題集 1Z0-058認定試験 1Z0-058
NO.12 Which two actions in a warehousing RAC database may cause concurrent cross-instance calls leading
to I/O contention?
A. truncate table statements
B. select statements referring to non-partitioned tables
C. drop table statements
D. insert statements where each instance inserts into different partitions of a partitioned table
Answer: A,C
Oracle 1Z0-058 1Z0-058問題集 1Z0-058問題集 1Z0-058過去問 1Z0-058認定資格
NO.13 The Oracle 11g Release 2 (version 11.2.0.1) ASM instance has a new diskgroup named DATA that is
currently not mounted. You log in to a cluster node as the Grid Infrastructure software owner and set the
environment variables to point to the ASM instance on that node. Using SQL*Plus, you issue the
commands:
CONNECT / AS SYSDBA
ALTER DISKGROUP DATA MOUNT;
The system response is:
ERROR at line 1:
ORA-15032: not all alterations performed
ORA-15260: permission denied on ASM disk group
How do you diagnose this error?
A. Check v$asm_operation for operations halted by the error.
B. Check v$asm_attributes to determine the asm.compatible setting.
C. Check v$asm_usergroup to determine the owning user group for this diskgroup.
D. Check v$xs_session_role to determine the role privileges of the current user.
E. Check the connect string for the privileged role.
Answer: E
Oracle 1Z0-058 1Z0-058 1Z0-058 1Z0-058認定証
NO.14 Which two types of files can be stored In an ASM clustered file system?
A. OCR and Voting Disk files
B. data files for external tables
C. Oracle database executable
D. Grid Infrastructure executables
E. data files for tablespaces F. archive log files
Answer: B,C
Oracle 1Z0-058 1Z0-058 1Z0-058問題集 1Z0-058認定試験
NO.15 Which three statements are true about using RMAN with ASM?
A. RMAN is the only supported method to back up database files stored in ASM.
B. RMAN is the only supported method to back up ACFS files.
C. RMAN can use ASM storage for backups.
D. RMAN cannot use ASM storage for backups.
E. Using RMAN, database files can be migrated to ASM from a file system.
F. Using RMAN, database files cannot be moved from ASM to a file system
Answer: A,C,E
Oracle 1Z0-058過去問 1Z0-058 1Z0-058認証試験 1Z0-058 1Z0-058
NO.16 Your production environment cluster is running Oracle Enterprise Linux and currently has four nodes.
You are asked to plan for extending the cluster to six nodes. Which three methods are available to add the
new nodes?
A. silent cloning usingcrsctlclone cluster and ssh
B. a GUI interface from Enterprise Manager
C. with the Oracle Universal Installer using runInstaller clone <nodename>
D. silent cloning usingperl clone.pl silent either with parameters in a file or in line
E. using addNode.sh
Answer: B,D,E
Oracle問題集 1Z0-058練習問題 1Z0-058認証試験 1Z0-058認証試験
NO.17 After Oracle Grid Infrastructure has been installed, you should take a few moments to verify the
installation.
Which two actions would be useful in verifying the installation.?
A. Run the crsctl status resource t command to confirm that all necessary cluster resources are online.
B. Use the operating system utilities to verify that your SCAN addresses are being properly resolved.
C. Start Oracle Enterprise Manager and check all monitored targets.
D. Run the cluvfy comp nodecon n all verbose command to verify the entire Grid Infrastructure
installation.
Answer: A,B
Oracle 1Z0-058 1Z0-058認定試験 1Z0-058
NO.18 Which three actions would be helpful in determining the cause of a node reboot?
A. determining the time of the node reboot by using the uptime command and subtracting the up time
from the current system time
B. looking for messages such as "Oracle CSSD failure. Rebooting for cluster integrity" in
/var/log/messages
C. using the crsctl command to view tracing information
D. inspecting the ocssd log for "Begin Dump" or "End Dump" messages
E. inspecting the database alert log for reboot messages
Answer: A,B,D
Oracle 1Z0-058 1Z0-058参考書 1Z0-058
NO.19 You want to create an ACFS on an ADVM volume using a shell script and the appropriate command-line
utilities. These are the requirements:
- The dynamic volume file must use space in the VOLFILE disk group with a size of 500 M and be called
prodvol.
- The mount point called /acfs already exists.
Which four steps must be performed to achieve this?
A. As the Grid Infrastructure owner, run mount -t acfs /dev/asm/prodvol-417 /acfs to mount the file system.
B. As the Grid Infrastructure owner, run asmcmd volinfo -d volfile prodvol to determine the volume
information.
C. As the Grid Infrastructure owner, run asmcmd volcreate -d volfile -s 500M prodvol to create the volume
file.
D. As the Grid Infrastructure owner, run mkfs -t acfs /dev/asm/prodvol-417 to create the file system.
E. As root, run mount -t acfs /dev/asm/prodvol-417 /acfs to mount the file system.
F. As root, run mkfs -t acfs /dev/asm/prodvol-417 to create the file system.
Answer: B,C,D,E
Oracle 1Z0-058参考書 1Z0-058問題集 1Z0-058
NO.20 The Instance Initialization parameters are set to:
DB_CREATE_FILE_DEST = +DATA
DB_CREATE_ONLlNE_LOG_DEST_l = +LOGS
DB_CREATE_ONLlNE_LOG_DEST_2 = + FRA
The SQL* Plus command ALTER DATABASE ADD LOGFILE;
will create:
A. a new log file in the +DATA disk group, or a log file in the + FRA disk group, if +DATA is not available
B. a new log file in the +DATA disk group and a log file in the + FRA disk group
C. a new log file in the +LOGS disk group and a log file in the + FRA disk group
D. a new log file in the +LOGS disk group, or a log file in the +FRA dls* available
E. a new log file in the +DATA disk group, a log file in the +LOGS disk group, and a log file in the +FRA
disk group
F. a new log file in the +LOGS disk group, or a log file in the +FRA disk group, if +LOGS is not available
Answer: C
Oracle認証試験 1Z0-058 1Z0-058
JPexamは最新のMSC-431問題集と高品質の1z0-481問題と回答を提供します。JPexamのHP0-J64 VCEテストエンジンとNS0-504試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の700-301 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论