JPexamの問題集を購入したら、あなたの試験合格率が100%を保証いたします。もし試験に失敗したら、弊社が全額で返金いたします。
あなたは自分の職場の生涯にユニークな挑戦に直面していると思いましたら、MicrosoftのMB6-817の認定試験に合格することが必要になります。JPexamはMicrosoftのMB6-817の認定試験を真実に、全面的に研究したサイトです。JPexam のユニークなMicrosoftのMB6-817の認定試験の問題と解答を利用したら、試験に合格することがたやすくなります。JPexamは認証試験の専門的なリーダーで、最全面的な認証基準のトレーニング方法を追求して、１００パーセントの成功率を保証します。JPexamのMicrosoftのMB6-817の試験問題と解答は当面の市場で最も徹底的かつ正確かつ最新な模擬テストです。それを利用したら、初めに試験を受けても、合格する自信を持つようになります。
ITテストと認定は当面の競争が激しい世界でこれまで以上に重要になりました。それは異なる世界の未来を意味しています。MicrosoftのMB6-817の試験はあなたの職場生涯で重要な画期的な出来事になり、新しいチャンスを発見するかもしれません。ところが、MicrosoftのMB6-817の試験にどうやって合格しますか。心配することはないですよ、ヘルプがあなたの手元にありますから。JPexamを利用したら恐いことはないです。JPexamのMicrosoftのMB6-817の試験問題と解答は試験準備のパイオニアですから。
MB6-817問題集の品質を確かめ、この問題集はあなたに合うかどうかを確認することができるように、JPexamはMB6-817問題集の一部のダウンロードを無料で提供します。二つのバージョンのどちらでもダウンロードできますから、JPexamのサイトで検索してダウンロードすることができます。体験してから購入するかどうかを決めてください。そうすると、MB6-817問題集の品質を知らないままに問題集を購入してから後悔になることを避けることができます。
MB6-817認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまMB6-817試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいMB6-817試験に関連する参考書が登場しますよ。それはJPexamのMB6-817問題集です。気楽に試験に合格したければ、はやく試しに来てください。
いまMB6-817認定試験の過去問問題集や参考書を必要とするでしょう。仕事に忙しいですから、試験の準備をする時間が足りないでしょう。ですから、効率が良い試験MB6-817参考書が必要です。もちろん、よりよく試験の準備をするように、自分に相応しいツールを選択するのは一番大事なことです。これは試験に合格できるかどうかに関連する大切な問題です。ですから、JPexamのMB6-817問題集を選択してください。
試験番号：MB6-817問題集
試験科目：AX 2009 Trade and Logistics
最近更新時間：2014-02-20
問題と解答：全170問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MB6-817_exam.html
NO.1 You are a new order processor in the Contoso company. You must enter a new sales order into
the system. However, you are not sure that all the data is correct. Therefore, you would like a more
experienced Order Processor to check it before confirming the order. How can you handle this in
Microsoft Dynamics AX 2009?
A.Create a sales order of the type Journal.
B.Create a sales order of the type Subscription.
C.Create a Blanket order.
D.Create a sales quotation.
Correct:A
Microsoft MB6-817 MB6-817認定証
NO.2 Which of the following must be set up before creating transfer orders in Microsoft Dynamics
AX 2009? Choose the 2 that apply.
A.The transport time must be created and set up.
B.The transit warehouse must be created.
C.The To warehouse must have a transit warehouse attached.
D.The From warehouse must have a transit warehouse attached.
Correct:B D
Microsoft MB6-817 MB6-817認定証
NO.3 You are an order processor in the Contoso company. You want to validate an order entry setup
for your best customers. It must be valid for all sites on every workday, at 4 p.m. How can you
achieve this?
A.Select the All sites and All order group check box in the Activate order entry deadline combinations form.
B.Create a new entry order deadline group and approve it.
C.Activate assign an order entry deadline group to a customer.
D.Create a group, activate the combination, and set up the combination with the weekdays and time.
Correct:D
Microsoft MB6-817 MB6-817認定証
NO.4 Which of the following is not an item dimension in Microsoft Dynamics AX 2009?
A.Color
B.Batch number
C.Size
D.Configuration
Correct:B
Microsoft MB6-817 MB6-817認定証
NO.5 The item 9004 is a high-risk item. The Contoso company must be able to trace each of these
items back to purchase and forward to sales if it becomes necessary to recall the items. Which of
the following options do you choose to ensure this full traceability?
A.Set up a unique inventory model group for the item.
B.Manually allocate unique serial numbers to the items on issue.
C.Assign a serial number group to the item that allocates unique serial numbers to each item on receipt.
D.Set up the item inventory model group to automatically assign unique Lot IDs to each item.
Correct:C
Microsoft MB6-817 MB6-817認定証
NO.6 You are a warehouse employee. How can you save your settings for the Arrival overview form to
your computer?
A.Specify a setup name on the Setup tab of the Arrival overview form and select to save the current
settings.
B.Specify a setup name on the Setup tab of the Inventory parameters form and select to save the current
settings.
C.The system does not allow you to save settings for the Arrival overview form on your local machine.
D.Create new or update your current settings, save them, and select your computer in the Apply to field.
Correct:A
Microsoft MB6-817 MB6-817認定証
NO.7 What is the issue status of an inventory transaction, after you ship a transfer order?
A.Shipped
B.Delivered
C.Received
D.Sold
Correct:D
Microsoft MB6-817 MB6-817認定証
NO.8 You are the Materials manager in the Contoso company. You set up item 1007 CRT Television
Model 01. The sales warehouse for this item is warehouse 21. How can you prevent the sales
warehouse from being changed on the sales order line, after the line is created?
A.Disable the warehouse change parameter on the sales order header.
B.In the Default order settings form, specify that the sales warehouse selected for the item is mandatory.
C.Select the Primary stocking check box in the item dimension group.
D.Specify warehouse 21 and select the Mandatory check box in the Create sales order dialog box.
Correct:B
Microsoft MB6-817 MB6-817認定証
NO.9 What is the Item arrival functionality used for in Microsoft Dynamics AX 2009?
A.For estimating and managing item arrival alerts
B.For viewing expected receipts and to start the arrival processing
C.For registering items that are delivered to the transfer warehouse
D.For checking that ordered items physically arrived to the quarantine warehouse
Correct:B
Microsoft MB6-817 MB6-817認定証
NO.10 A serialized item belongs to an inventory model group that has the Picking requirement
parameter selected. The Blank issue check box is selected in the item dimensiongroup. How does
this influence the picking process? Choose the 2 that apply.
A.Serial numbers must be specified before a packing slip update, as the settings in the inventory model
group overrule the settings in the dimension group.
B.The sales order cannot be invoice updated without specifying serial numbers.
C.Order lines can be picked and invoiced without specifying serial numbers for the items.
D.Picking list registration must be performed.
Correct:C D
Microsoft MB6-817 MB6-817認定証
NO.11 How can you specify item prices in Microsoft Dynamics AX 2009? Choose the 2 that apply.
A.Automatically, if setup in the inventory parameters.
B.Manually, on the Setup tab of the Customer/Vendor form.
C.Manually, on the Price/Discount tab of the Items form.
D.By using costing versions.
Correct:C D
Microsoft MB6-817 MB6-817認定証
NO.12 If warehouse is specified as the primary stocking dimension, and warehouse is specified on a
sales order line, how does this influence automatic reservation?
A.A reservation is made against the dimension with the lowest alphanumeric ID.
B.Items are reserved only at the warehouse specified.
C.Items are reserved according to the LIFO principle.
D.Items are reserved according to the FIFO principle.
Correct:B
Microsoft MB6-817 MB6-817認定証
NO.13 You are the Quality assurance manager in the Contoso company. You receive customer
complaints about the screen image quality of the item 1000 LCD Television. How do you initiate
the test task to test the screen image for this item in Microsoft Dynamics AX 2009?
A.Create a Quarantine order from a sales order.
B.Click Functions > Test from a sales order.
C.Create and set up a new problem type.
D.Create a manual quality order.
Correct:D
Microsoft MB6-817 MB6-817認定証
NO.14 Which of the following is not a non-conformance type in the Quality management module of
Microsoft Dynamics AX 2009?
A.Customer
B.Service request
C.Item
D.Production
Correct:C
Microsoft MB6-817 MB6-817認定証
NO.15 If the counted quantity of items is more or less than the posted quantity, what happens when
you post the Counting journal?
A.Counting transactions are created and posted for each item counted.
B.Profit and loss transactions are created but not posted.
C.The quantity difference report is generated.
D.The difference in quantity should be manually posted.
Correct:A
Microsoft MB6-817 MB6-817認定証
NO.16 The item Plasma Television Model 01 is set up with the following specifications: In the batch
number group assigned to the item, the allocation method is set up as follows: The Only for
inventory transactions check box is selected, the On physical update check box is selected, and
10 is specified in the Per qty. field.The items dimension group has batch number activation. When
a purchase order for 200 Plasma Television Model 01 is posted, when are the batch numbers
allocated to the items,and how many inventory transactions are made?
A.The batch numbers are allocated on receipt list update and 20 transactions are made.
B.The batch numbers are allocated on receipt list update and 200 transactions are made.
C.The batch numbers are allocated on packing slip update and 20 transactions are made.
D.The batch numbers are allocated on packing slip update and 200 transactions are made.
Correct:C
Microsoft MB6-817 MB6-817認定証
NO.17 Which of the following is not a storage dimension in Microsoft Dynamics AX 2009?
A.Site
B.Batch
C.Pallet ID
D.Size
Correct:D
Microsoft MB6-817 MB6-817認定証
NO.18 How can you reserve items that are not on hand, but for which purchase orders are created?
A.Automatic reservation should be used.
B.Ordered but not yet received items are always available for reservations.
C.Select the Allow negative quantity check box for the item.
D.Select the Reserve ordered items check box in Inventory parameters.
Correct:D
Microsoft MB6-817 MB6-817認定証
NO.19 If you want a task to be completed within a specific period of time, how can you set this up in a
purchase requisition workflow configuration?
A.Specify the From and To dates in a workflow configuration.
B.Select the Set a time limit for the task check box and specify a time limit.
C.Activate the automatic actions in Accounts payable parameters.
D.Create a separate workflow and define alert rules for the task.
Correct:B
Microsoft MB6-817 MB6-817認定証
NO.20 How can you set up a quality order to be generated automatically after you post a purchase
order picking list for an item?
A.Select the Create quality order automatically check box in Inventory management parameters.
B.Define rules in the Quality associations form.
C.When setting up posting profiles, set the Quality order field to Automatic.
D.When posting the picking list, select the Create quality order check box.
Correct:B
Microsoft MB6-817 MB6-817認定証
JPexamは最新のVCP-510問題集と高品質のHP2-B97問題と回答を提供します。JPexamの98-375 VCEテストエンジンと1Z0-478試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_ISR_60 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论